This set of 100 Fitting Luer Male .170 is suitable for VUTEk QS-series and GS-Series printers. These connectors have a male ISO Luer lock on one side and an 4.3mm (0.17 inch) tube hose barb on the other side. P4812-A is the original VUTEk component.
Mimaki printers can use this JV400 Fitting – VFI126.
SKU: VFI126
Manufacturer part number: VFI126
Manufacturer: Mimaki
This product has been discontinued by the manufacturer. Please scroll down for more information below.
SKU: 1000005273
Manufacturer part number: 1000005273
Manufacturer: Roland
Summa SummaSign cutters are compatible with this BELT Y-MOTOR 150T.
SKU: 004612
Manufacturer part number: MB0380
Manufacturer: Summa
Mutoh VJ-1608HS printers can use this generic CR Deceleration Belt Assy.
SKU: 011011
Manufacturer part number: DG-42458
Manufacturers: DIGIPRINT , Mutoh
This original Jason toothed timing belt is suitable for Agfa Gandinnovations Jeti 5000 and 5024 Solvent printers. The belt is temperature resistant from -20 to 100°C, has a circumference of 960mm and a width of 20mm. This is the original Agfa / Gandinnovations part (number 615-960820).
SKU: HTD 960-8M
Manufacturer part number: 615-960820
Manufacturer: Agfa
This generic foam cap top of high quality fits the capping station of Roland Soljet and Versacamm printers as well as Mutoh Rockhopper II, Falcon II, and Spitfire.
SKU: PCAROSJ006
Manufacturers: DIGIPRINT , Roland , Mutoh
Mutoh Valuejet 1604 printers are compatible with this steel belt.
SKU: DF-43937
Manufacturer part number: DF-43937
Manufacturer: Mutoh
Mimaki JV3, JV33, and JV5 series printers are compatible with this generic speed reduction belt.
SKU: PBEMIJV305O
Manufacturer part number: 150 S2M 380G
Manufacturer: DIGIPRINT
Various Roland and Mimaki printers are compatible with this bearing block, QEH15CA.
SKU: QEH15CA
Manufacturer part number: QEH15CA
Manufacturers: Roland , Mimaki
Mutoh VJ-1608HS printers can use this generic CR Deceleration Belt Assy.
SKU: 011011
Manufacturer part number: DG-42458
Manufacturers: DIGIPRINT , Mutoh
Printers in the CJV300, CJV150, JV150, and JV300 series can use this timing belt.
SKU: 10379
Manufacturer part number: 100S2M210
Manufacturer: Mimaki
Mutoh Valuejet 1604 printers are compatible with this CR speed reduction belt. The original Mutoh component (DF-43940) can be found here. The circumference of this 10-millimeter-wide CR speed reduction belt is 240 millimeters.
SKU: PBEMUVJ6002
Manufacturer part number: DF-43940
Manufacturer: Mutoh
Select at least 2 products
to compare
Reviews
There are no reviews yet.