Description
The majority of printers are compatible with this ink waste tank. It has a floater with alarm, 2 ink inlets for connecting ID 4mm tubings and 2 ink outlets for connecting ID 4mm tubings. the cappings are provided to close the unused inlets/ outlets
DIGIMEDIA Monomeric Gloss Overlaminate – 1600 mm x 50 m (63″ x 164′)
$277.82High-quality, self-adhesive 70 clear monomeric vinyl with UV protection and an acrylic-based, high-tack, permanent adhesive. This competitive calendered vinyl, which comes in gloss and matte finishes, is an excellent lamination for protecting digitally printed images. Easy to clean, this film can also be used as anti-graffiti protection. As low as €1.05 per square meter
SKU: DLMG63
Manufacturer part number: DLMG63
Distributor: DIGIPRINT
Jeti 3312 UNF Thread to Hose Barb connector 3mm ID Tubing (10 pcs)
$51.21This set of ten UNF Thread to Hose Barb connectors is used on the Jeti 3312 ink tank and is compatible with 3mm ID tubing. The original Agfa part is here. The inner diameter of this UNF Thread to Hose Barb connector is 2.41 millimeters, while the outer diameter is 3.30 millimeters.
SKU: PCNAG13439
Manufacturer: Agfa
Ricoh GEN5 Cap Top
$72.13Ricoh GEN5 printhead-equipped printers can use this cap top. On UV printers, this cap top delivers the best performance.
SKU: PCADI87855
Manufacturers: DIGIPRINT , Ricoh
Colorpainter 64S Steel Belt – U00101625600
$306.14This generic steel belt (64) is suitable for Seiko Colorpainter 64S and HP Designjet 9000 printers. This generic part, which is the same as Seiko part number U00101625600, is of excellent quality. This belt is 468.5cm long and 2.5cm wide.
SKU: PBESECP0040
Manufacturer part number: U00101625600
Manufacturers: DIGIPRINT , Oki
Toucan Steel Belt, 64 Assy – DF-44131
$221.67This generic Steel Belt, 64″ Assy is suitable for Mutoh Toucan 64 and Toucan Hybrid printers. This is a high quality generic part that corresponds to Mutoh part number DF-44131. Mutoh does not manufacture the original belt anymore as it was discontinued. This belt measures 472.5cm long and 2.5cm wide.
SKU: PBEMUTO6001O
Manufacturer part number: DF-44131
Manufacturers: DIGIPRINT , Mutoh
Marabu ClearShield® Anti-Graffiti Part A, Gloss – 1 Gallon
$307.57Marabu Clearshield® Anti-Graffiti is a two-part, water-based liquid clear coat that protects any print from UV rays, resists chemicals and abrasion, and has unparalleled anti-graffiti properties. It is made to protect non-water-sensitive media like vinyl and banners printed with UV, solvent, and Latex inks from graffiti made with spray paint, latex paint, markers, and other materials.
SKU: 360259581
Manufacturer part number: 360259581
Manufacturer: Marabu
Related Products
JV5 Bearing – F699ZZ
$4.93Mimaki JV5, JV33, and UJF-3042 printers are compatible with this generic bearing.
SKU: PMEMI18835
Manufacturer part number: F699ZZ
Manufacturers: Mimaki , DIGIPRINT
SummaSign BELT X-MOTOR 110T,W=0.25 – MB9124
$28.83Summa SummaSign cutters are compatible with this BELT X-MOTOR 110T, W=0.25.
SKU: 007828
Manufacturer part number: MB9124
Manufacturer: Summa
VP-540 L-Bearing, SSR15XW1GGE (Block only)
$302.13Several Roland printers are compatible with this bearing block, SSR15XW1GGE (see compatibility list below).
SKU: SSR 15 X W SS G
Manufacturer part number: 1000002145
Manufacturer: Roland
JV33 Y Drive Belt – M800982
$254.72This product has been discontinued by the manufacturer. Please continue reading for additional details.
SKU: M800982
Manufacturer part number: M800982
Manufacturer: Mimaki
VJ-1604 Bearing – KY-14620
$4.57Mutoh Valuejet 1604 printers can use this generic bearing.
SKU: PMEMUVJ002O
Manufacturer part number: KY-14620
Manufacturers: DIGIPRINT , Mutoh
CJ-540 Belt, 408P2M4-530 – 11929138
$16.00Roland CJ-540 printers are compatible with this generic belt, 408P2M4-530.
SKU: 008055
Manufacturer part number: 11929138
Manufacturers: Roland , DIGIPRINT
Reviews
There are no reviews yet.