Description
The majority of printers are compatible with this ink waste tank. It has a floater with alarm, 2 ink inlets for connecting ID 4mm tubings and 2 ink outlets for connecting ID 4mm tubings. the cappings are provided to close the unused inlets/ outlets
Jeti Jason Toothed Timing Belt – 615-960820
$162.40This original Jason toothed timing belt is suitable for Agfa Gandinnovations Jeti 5000 and 5024 Solvent printers. The belt is temperature resistant from -20 to 100°C, has a circumference of 960mm and a width of 20mm. This is the original Agfa / Gandinnovations part (number 615-960820).
SKU: HTD 960-8M
Manufacturer part number: 615-960820
Manufacturer: Agfa
Marabu Clearshield® Classic Lite – 5L – Semi-Gloss
$306.08Marabu Clearshield® Classic is a water-based liquid coating with a low viscosity that provides enhanced UV protection as well as chemical and abrasion resistance. can be applied with a brush, roller, or automated spray equipment or by hand. If you’re looking for a laminate with a lower viscosity, Classic Lite is an option that provides the same excellent protection as ClearShield Classic.
SKU: 360298812
Manufacturer part number: 360298812
Manufacturer: Marabu
PNC-1850 Drive Belt W20 – 22565120
$888.12The manufacturer has discontinued this product. Please continue reading for additional details.
SKU: 22565120
Manufacturer part number: 22565120
Manufacturer: Roland
Arizona 250 Belt Gantry GT – 3W3010103684
$1,264.68This Belt Gantry GT is suitable for Océ Arizona 250 GT printers. This is the original Océ part (number 3010103684). This Belt Gantry GT is 385.6cm long and 3.8cm wide.
SKU: 3W3010103684
Manufacturer part number: 3010103684
Manufacturer: Canon Océ
RJ-8000 Ink ID Board Assy – DF-43968
$131.58This Ink ID Board Assy (Smart Chip reader) is suitable for Mutoh RJ-8000 (Falcon II) printers.
SKU: DF-43968
Manufacturer part number: DF-43968
Manufacturer: Mutoh
UltraVu II 5330 Coupling .25-.25 Flex – P7816-A
$448.92VUTEk UltraVu II 5330 printers are compatible with this Coupler.25-.25 Flex. This is the original P7816-A VUTEk component. The width of this Coupler.25-.25 Flex is 25.5 mm. It has an inner diameter of 6.33mm and an outer diameter of 25.30mm.
SKU: P7816-A
Manufacturer part number: P7816-A
Manufacturer: EFI
Related Products
S Class 75 KIT FLATCABLES S75T – 395-403
$240.67This KIT FLATCABLES S75T is suitable for Summa S Class 75 cutters. This is the original Summa part (number 395-403).
Printer compatibility
Summa S-Class-75-T-Series
CJ-540 Belt, 408P2M4-530 – 11929138
$16.00Roland CJ-540 printers are compatible with this generic belt, 408P2M4-530.
SKU: 008055
Manufacturer part number: 11929138
Manufacturers: Roland , DIGIPRINT
QEH15CA L-Bearing (Block only)
$238.90Various Roland and Mimaki printers are compatible with this bearing block, QEH15CA.
SKU: QEH15CA
Manufacturer part number: QEH15CA
Manufacturers: Roland , Mimaki
AJ-1000 Assy, Main Board – 1000000559
$3,431.37This Assy, Main Board is suitable for Roland AJ-1000 printers. This is the original Roland part (number 1000000559). Printer compatibility Roland AJ-1000 Roland AJ-1000i Roland AJ-740 Roland AJ-740i Product specifications Type Main Boards
JV3 Y Timing Belt – 150 S2M 380G
$14.42Mimaki JV3, JV33, and JV5 series printers can use this generic speed reduction belt.
SKU: S2M-380-15MM
Manufacturer part number: 150 S2M 380G
Manufacturers: Mimaki , DIGIPRINT
JV33 Y Drive Belt – M800982
$163.41Mimaki JV33 printers are compatible with this generic Y drive belt, which is also known as a carriage belt.
SKU: PBEMIJV3301S
Manufacturer part number: M800982
Manufacturers: Mimaki , DIGIPRINT
Reviews
There are no reviews yet.