Description
This Mini T-shaped One Touch Fitting is suitable for Inktec Jetrix 3015FQ & Jetrix 2513FRQ printers. This is the first Inktec component. Inner diameter is 0.6cm wide and outer diameter is 1cm wide.
VJ-1304 Steel Bear Assy – DG-41142
$199.92Mutoh Valuejet 1304 printers are compatible with this Steel Bear Assembly. This is the original Mutoh part (number DG-41142). The length and width of this Steel Bear Assy are 3.1 centimeters.
SKU: DG-41142
Manufacturer part number: DG-41142
Manufacturer: Mutoh
Straight Hose Tail Coupling 1/8″ – PMCD2202
$76.45This Straight Hose Tail Coupling 1/8″ is suitable for a specific range of printers using Starfire printheads.
SKU: PMCD2202
Manufacturer part number: PMCD2202
Manufacturer: DIGIPRINT
Neo Titan Hose Elbow Secondary Tanks – 7300104-0008
$20.70The secondary ink tanks of the Dilli Neo Titan 1604D series printers are attached with this Hose Elbow.
SKU: M-5HL-6
Manufacturer part number: 7300104-0008
Manufacturer: Dilli
Summa T1300 Belt – MB9125
$13.46The Summa T1300 cutting plotters can use this belt.
SKU: 9056
Manufacturer part number: MB9125
Manufacturer: Summa
UJF-3042 Cap rubber R – M700652
$154.11Mimaki printers can use this UJF-3042 Cap rubber R – M700652.
SKU: M700652
Manufacturer part number: M700652
Manufacturer: Mimaki
FP-740 Carton, Vk-Spacer – 1000001174
$25.11This product has been discontinued by the manufacturer. Please scroll down for more information below.
SKU: 1000001174
Manufacturer part number: 1000001174
Manufacturer: Roland
Related Products
VJ-1608HS CR Deceleration Belt Assy – DG-42458
$52.86Mutoh VJ-1608HS printers can use this generic CR Deceleration Belt Assy.
SKU: 011011
Manufacturer part number: DG-42458
Manufacturers: DIGIPRINT , Mutoh
JV33 Y Drive Belt – M800982
$254.72This product has been discontinued by the manufacturer. Please continue reading for additional details.
SKU: M800982
Manufacturer part number: M800982
Manufacturer: Mimaki
S Class 75 KIT FLATCABLES S75T – 395-403
$240.67This KIT FLATCABLES S75T is suitable for Summa S Class 75 cutters. This is the original Summa part (number 395-403).
Printer compatibility
Summa S-Class-75-T-Series
QEH15CA L-Bearing (Block only)
$238.90Various Roland and Mimaki printers are compatible with this bearing block, QEH15CA.
SKU: QEH15CA
Manufacturer part number: QEH15CA
Manufacturers: Roland , Mimaki
JV3 Y Timing Belt – 150 S2M 380G
$14.42Mimaki JV3, JV33, and JV5 series printers can use this generic speed reduction belt.
SKU: S2M-380-15MM
Manufacturer part number: 150 S2M 380G
Manufacturers: Mimaki , DIGIPRINT
Summa S Class Kit S(2) 120 Flat Cable – KIT-2030
$416.04This KIT FLATCABLES S120T is suitable for Summa S Class 12 cutters. This is the original Summa part (replacing part number 395-405).
Printer compatibility
Summa S-Class-120-T-Series
Reviews
There are no reviews yet.