Description
This Mini T-shaped One Touch Fitting is suitable for Inktec Jetrix 3015FQ & Jetrix 2513FRQ printers. This is the first Inktec component. Inner diameter is 0.6cm wide and outer diameter is 1cm wide.
Rockhopper 38 Tube Fitting – DE-49992
$7.03Mutoh Rockhopper 38 (Falcon Jr.) printers are compatible with this tube fitting. The original Mutoh component (number DE-49992) is here.
SKU: DE-49992
Manufacturer part number: DE-49992
Manufacturer: Mutoh
Generic Open White PU Belt S2M 15mm (5m roll)
$66.57Open White PU Belt, Generic, S2M 15mm
SKU: GALS2M5O
Anapurna M2050 Capping Pad Assy (8 pcs) – 7021240-0009
$441.30Agfa Anapurna M2050 printers are compatible with this set of eight capping Pad Assy.
SKU: 7021240-0009
Manufacturer part number: 7021240-0009
Manufacturer: Agfa
UJV-160 Y Drive Belt V160-6500 – M801070
$673.93This UJV-160 Y Drive Belt V160-6500 – M801070 is suitable for Mimaki printers.
SKU: M801070
Manufacturer part number: M801070
Manufacturer: Mimaki
UJF-7151 Cap Slider Assembly – M017352
$511.37Mimaki printers can use this UJF-7151 Cap Slider Assembly – M017352.
SKU: M017352
Manufacturer part number: M017352
Manufacturer: Mimaki
TS500 Cap Rubber G540F – M700682
$77.06For Mimaki printers, this TS500 Cap Rubber G540F – M700682 is suitable.
SKU: M700682
Manufacturer part number: M700682
Manufacturer: Mimaki
Related Products
JV3 Y Timing Belt – 150 S2M 380G
$14.42Mimaki JV3, JV33, and JV5 series printers can use this generic speed reduction belt.
SKU: S2M-380-15MM
Manufacturer part number: 150 S2M 380G
Manufacturers: Mimaki , DIGIPRINT
Summa S Class Kit S(2) 120 Flat Cable – KIT-2030
$416.04This KIT FLATCABLES S120T is suitable for Summa S Class 12 cutters. This is the original Summa part (replacing part number 395-405).
Printer compatibility
Summa S-Class-120-T-Series
SummaSign BELT X-MOTOR 110T,W=0.25 – MB9124
$28.83Summa SummaSign cutters are compatible with this BELT X-MOTOR 110T, W=0.25.
SKU: 007828
Manufacturer part number: MB9124
Manufacturer: Summa
S Class 75 KIT FLATCABLES S75T – 395-403
$240.67This KIT FLATCABLES S75T is suitable for Summa S Class 75 cutters. This is the original Summa part (number 395-403).
Printer compatibility
Summa S-Class-75-T-Series
JV33 Y Drive Belt – M800982
$163.41Mimaki JV33 printers are compatible with this generic Y drive belt, which is also known as a carriage belt.
SKU: PBEMIJV3301S
Manufacturer part number: M800982
Manufacturers: Mimaki , DIGIPRINT
VJ-1604 Bearing – KY-14620
$4.57Mutoh Valuejet 1604 printers can use this generic bearing.
SKU: PMEMUVJ002O
Manufacturer part number: KY-14620
Manufacturers: DIGIPRINT , Mutoh
Reviews
There are no reviews yet.