This Block MES20 is suitable for Mimaki JF-1610 & JF-1631 series printers. This part includes the block only (without the rail) that corresponds to part number MES20C2R3700 & MES20C2R1480. This is the full block with ball bearings mounted in.
| Ink Type | Aqueous, Direct to Garment, DTF, Dye, Dye Sublimation, Eco-Solvent, Edible, Hard Solvent, Latex, Low Solvent, Mild Solvent, Pigment, UV, UV Curable |
|---|---|
| Printer Brand | Agfa, Brother, Canon, Epson, Fuji, Homer, HP, Kiaro, Kornit, Kyosera, Mimaki, Mutoh, Noritsu, NUR, Oce, Oki, Ricoh, Roland, Seiko, STS, Vutek |
| Printer Model | Jeti Titan 3020, Jeti Titan HS, Jeti Titan S |
| Printer Series | Jeti Mira Series, Jeti Tauro Series, Jeti Titen Series |
This TX400-1800D Joint 3-3 – M601067 is suitable for Mimaki printers.
SKU: M601067
Manufacturer part number: M601067
Manufacturer: Mimaki
The Roland FJ-600 and FJ-500 waterbased printers are compatible with this capping station and ink system assembly. Long-lasting performance is provided by this pump and cap top assembly, which is designed specifically for Roland printers and water-based inks. This is the genuine cap top for the Roland FJ600 (part number 12809371AS).
SKU: 12809371AS
Manufacturer part number: 12809371AS
Manufacturer: Roland
This kit is suitable for Summa S2 75D Series.
SKU: KIT-2025
Manufacturer part number: KIT-2025
Manufacturer: Summa
Mimaki JV5 printers can use this set of two generic capping assys.
SKU: PCAMIJV5004
Manufacturer part number: M905240
Manufacturers: DIGIPRINT , Mimaki
Several Roland printers are compatible with this bearing block, SSR15XW1GGE (see compatibility list below).
SKU: SSR 15 X W SS G
Manufacturer part number: 1000002145
Manufacturer: Roland
This Xaar 128/40 printhead adapter is compatible with Witcolor Ultra 3320 and Ultra 860 printers. This was the original Witcolor component. Standard Xaar 128/40 printheads can be used with Witcolor printers that used special heads with the blue board thanks to this adapter.
SKU: PADWI11289
Manufacturer: Wit-Color
This KIT FLATCABLES S120T is suitable for Summa S Class 12 cutters. This is the original Summa part (replacing part number 395-405).
Printer compatibility
Summa S-Class-120-T-Series
Mimaki JV3, JV33, and JV5 series printers are compatible with this generic speed reduction belt.
SKU: PBEMIJV305O
Manufacturer part number: 150 S2M 380G
Manufacturer: DIGIPRINT
Roland XJ-640 printers can use this generic belt.
SKU: PBEROXJ6001O
Manufacturer part number: 1000003688
Manufacturers: DIGIPRINT , Roland
This Assy, Main Board is suitable for Roland printers. This is the original Roland part (number 6000003126). Printer compatibility Roland GR-540 Roland GR-640 Roland GR-420 Product specifications Type Main Boards
Mimaki JV3, JV33, and JV5 series printers can use this generic speed reduction belt.
SKU: S2M-380-15MM
Manufacturer part number: 150 S2M 380G
Manufacturers: Mimaki , DIGIPRINT
Mimaki JV33 printers are compatible with this generic Y drive belt, which is also known as a carriage belt.
SKU: PBEMIJV3301S
Manufacturer part number: M800982
Manufacturers: Mimaki , DIGIPRINT
Select at least 2 products
to compare
Reviews
There are no reviews yet.