This Block MES20 is suitable for Mimaki JF-1610 & JF-1631 series printers. This part includes the block only (without the rail) that corresponds to part number MES20C2R3700 & MES20C2R1480. This is the full block with ball bearings mounted in.
| Ink Type | Aqueous, Direct to Garment, DTF, Dye, Dye Sublimation, Eco-Solvent, Edible, Hard Solvent, Latex, Low Solvent, Mild Solvent, Pigment, UV, UV Curable |
|---|---|
| Printer Brand | Agfa, Brother, Canon, Epson, Fuji, Homer, HP, Kiaro, Kornit, Kyosera, Mimaki, Mutoh, Noritsu, NUR, Oce, Oki, Ricoh, Roland, Seiko, STS, Vutek |
| Printer Model | Jeti Titan 3020, Jeti Titan HS, Jeti Titan S |
| Printer Series | Jeti Mira Series, Jeti Tauro Series, Jeti Titen Series |
Roland printers are suitable for this cap-top case.
SKU: 21365121
Manufacturer part number: 21365121
Manufacturer: Roland
Mimaki JV5 printers can use this set of two generic capping assys.
SKU: PCAMIJV5003
Manufacturer part number: M905240
Manufacturers: DIGIPRINT , Mimaki
This is the original Witcolor part, and it fits WItcolor 9000 printers.
SKU: PCAWI11957
Manufacturer: Wit-Color
This timing belt is suitable for EFI VUTEk GS series printers. The original EFI component is this one (number 45075896). This timing belt has a width of 30 mm and a length of 10,92 m.
SKU: 45075896
Manufacturer part number: 45075896
Manufacturer: EFI
Printers of the Infiniti Fina 330PQ can use this connector. This is the original Inifiniti part.
SKU: PCNIN17751
Manufacturer: Infiniti
Picture of CX-24 Belt, 1526P2M6 – 11929116Picture of CX-24 Belt, 1526P2M6 – 11929116Picture of CX-24 Belt, 1526P2M6 – 11929116
The Roland CX-24 and GX-24 cutting plotters are compatible with this belt. This is the original Roland part (number 11929116). This belt has a circumference of 151.8cm and is 0.6cm wide.
SKU: 11929116
Manufacturer part number: 11929116
Manufacturer: Roland
This Assy, Main Board is suitable for Roland printers. This is the original Roland part (number 6000003126). Printer compatibility Roland GR-540 Roland GR-640 Roland GR-420 Product specifications Type Main Boards
Roland CJ-540 printers are compatible with this generic belt, 408P2M4-530.
SKU: 008055
Manufacturer part number: 11929138
Manufacturers: Roland , DIGIPRINT
Mimaki JV5, JV33, and UJF-3042 printers are compatible with this generic bearing.
SKU: PMEMI18835
Manufacturer part number: F699ZZ
Manufacturers: Mimaki , DIGIPRINT
Printers in the CJV300, CJV150, JV150, and JV300 series can use this timing belt.
SKU: 10379
Manufacturer part number: 100S2M210
Manufacturer: Mimaki
Mimaki JV33 printers are compatible with this generic Y drive belt, which is also known as a carriage belt.
SKU: PBEMIJV3301S
Manufacturer part number: M800982
Manufacturers: Mimaki , DIGIPRINT
Roland XJ-640 printers can use this generic belt.
SKU: PBEROXJ6001O
Manufacturer part number: 1000003688
Manufacturers: DIGIPRINT , Roland
Select at least 2 products
to compare
Reviews
There are no reviews yet.