This Block MES20 is suitable for Mimaki JF-1610 & JF-1631 series printers. This part includes the block only (without the rail) that corresponds to part number MES20C2R3700 & MES20C2R1480. This is the full block with ball bearings mounted in.
| Ink Type | Aqueous, Direct to Garment, DTF, Dye, Dye Sublimation, Eco-Solvent, Edible, Hard Solvent, Latex, Low Solvent, Mild Solvent, Pigment, UV, UV Curable |
|---|---|
| Printer Brand | Agfa, Brother, Canon, Epson, Fuji, Homer, HP, Kiaro, Kornit, Kyosera, Mimaki, Mutoh, Noritsu, NUR, Oce, Oki, Ricoh, Roland, Seiko, STS, Vutek |
| Printer Model | Jeti Titan 3020, Jeti Titan HS, Jeti Titan S |
| Printer Series | Jeti Mira Series, Jeti Tauro Series, Jeti Titen Series |
Agfa Anapurna M2050 printers are compatible with this set of eight capping Pad Assy.
SKU: 7021240-0009
Manufacturer part number: 7021240-0009
Manufacturer: Agfa
Mimaki printers can use this ST Drive Belt.
SKU: 40S2M596
Manufacturer part number: 40S2M596
Manufacturer: Mimaki
Mimaki JV3-160SP printers can use this generic bearing.
SKU: PMEMI13513
Manufacturer part number: F607ZZ
Manufacturers: Mimaki , DIGIPRINT
Mimaki JV33 printers are compatible with this 2 T Joint M6. This is the original part from Mimaki, number M602148.
SKU: M602148
Manufacturer part number: M602148
Manufacturer: Mimaki
Durst Rho printers are compatible with this natural polypropylene Male Luer to 500 Series Barb, 5/32″.
SKU: MLRL025-6005
Manufacturer part number: 1342811
Manufacturer: Durst
This wiper belt 40 S2M 32OU is suitable for Mimaki JV3 printers.
SKU: 007687
Manufacturer: Mimaki
Mimaki JV5, JV33, and UJF-3042 printers are compatible with this generic bearing.
SKU: PMEMI18835
Manufacturer part number: F699ZZ
Manufacturers: Mimaki , DIGIPRINT
Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
This Assy, Main Board is suitable for Roland AJ-1000 printers. This is the original Roland part (number 1000000559). Printer compatibility Roland AJ-1000 Roland AJ-1000i Roland AJ-740 Roland AJ-740i Product specifications Type Main Boards
Mimaki JV3, JV33, and JV5 series printers can use this generic speed reduction belt.
SKU: S2M-380-15MM
Manufacturer part number: 150 S2M 380G
Manufacturers: Mimaki , DIGIPRINT
Summa SummaSign cutters are compatible with this BELT Y-MOTOR 150T.
SKU: 004612
Manufacturer part number: MB0380
Manufacturer: Summa
Mutoh Valuejet 1604 printers are compatible with this steel belt.
SKU: DF-43937
Manufacturer part number: DF-43937
Manufacturer: Mutoh
Select at least 2 products
to compare
Reviews
There are no reviews yet.