This Block MES20 is suitable for Mimaki JF-1610 & JF-1631 series printers. This part includes the block only (without the rail) that corresponds to part number MES20C2R3700 & MES20C2R1480. This is the full block with ball bearings mounted in.
| Ink Type | Aqueous, Direct to Garment, DTF, Dye, Dye Sublimation, Eco-Solvent, Edible, Hard Solvent, Latex, Low Solvent, Mild Solvent, Pigment, UV, UV Curable |
|---|---|
| Printer Brand | Agfa, Brother, Canon, Epson, Fuji, Homer, HP, Kiaro, Kornit, Kyosera, Mimaki, Mutoh, Noritsu, NUR, Oce, Oki, Ricoh, Roland, Seiko, STS, Vutek |
| Printer Model | Jeti Titan 3020, Jeti Titan HS, Jeti Titan S |
| Printer Series | Jeti Mira Series, Jeti Tauro Series, Jeti Titen Series |
The Mimaki JV5-260S, JV5-320S, and JV5-320DS printers are compatible with this bear. This is the original component for the Mimaki (number 06-64-038-0-128-060.64.12).
Roland RA-640 printers are compatible with this Adapter Plug (100V). This is the original Roland part (number 13499209).
SKU: 13499209
Manufacturer part number: 13499209
Manufacturer: Roland
Mimaki TX2-1600 printers are compatible with this Hose Joint. The outer diameter of this Hose Joint is 34.1mm, while the inner diameter is 19.05mm. This is original Mimaki part (number M601138).
SKU: M601138
Manufacturer part number: M601138
Manufacturer: Mimaki
The manufacturer has discontinued this product. Please scroll down for more information below.
SKU: 13369898
Manufacturer part number: 13369898
Manufacturer: Roland
This product has been discontinued by the manufacturer. Please continue reading for additional details.
SKU: 1000002547
Manufacturer part number: 1000002547
Manufacturer: Roland
This Adjuster, M12*60*103 is suitable for Roland LEJ-640 printers. This is the original Roland part (number 1000009360).
SKU: 1000009360
Manufacturer part number: 1000009360
Manufacturer: Roland
Mutoh VJ-1608HS printers can use this generic CR Deceleration Belt Assy.
SKU: 011011
Manufacturer part number: DG-42458
Manufacturers: DIGIPRINT , Mutoh
This KIT FLATCABLES S120T is suitable for Summa S Class 12 cutters. This is the original Summa part (replacing part number 395-405).
Printer compatibility
Summa S-Class-120-T-Series
Summa SummaSign cutters are compatible with this BELT X-MOTOR 110T, W=0.25.
SKU: 007828
Manufacturer part number: MB9124
Manufacturer: Summa
Roland XJ-640 printers can use this generic belt.
SKU: PBEROXJ6001O
Manufacturer part number: 1000003688
Manufacturers: DIGIPRINT , Roland
Several Roland printers are compatible with this bearing block, SSR15XW1GGE (see compatibility list below).
SKU: SSR 15 X W SS G
Manufacturer part number: 1000002145
Manufacturer: Roland
Mutoh Valuejet 1604 printers can use this generic bearing.
SKU: PMEMUVJ002O
Manufacturer part number: KY-14620
Manufacturers: DIGIPRINT , Mutoh
Select at least 2 products
to compare
Reviews
There are no reviews yet.