This Block MES20 is suitable for Mimaki JF-1610 & JF-1631 series printers. This part includes the block only (without the rail) that corresponds to part number MES20C2R3700 & MES20C2R1480. This is the full block with ball bearings mounted in.
| Ink Type | Aqueous, Direct to Garment, DTF, Dye, Dye Sublimation, Eco-Solvent, Edible, Hard Solvent, Latex, Low Solvent, Mild Solvent, Pigment, UV, UV Curable |
|---|---|
| Printer Brand | Agfa, Brother, Canon, Epson, Fuji, Homer, HP, Kiaro, Kornit, Kyosera, Mimaki, Mutoh, Noritsu, NUR, Oce, Oki, Ricoh, Roland, Seiko, STS, Vutek |
| Printer Model | Jeti Titan 3020, Jeti Titan HS, Jeti Titan S |
| Printer Series | Jeti Mira Series, Jeti Tauro Series, Jeti Titen Series |
This ASSY, Y-BELT D160 is suitable for Summa SummaSign cutters. This is the original Summa part (number 399-684).
SKU: 399-684
Manufacturer part number: 399-684
Manufacturer: Summa
This Tube Fitting (Female) is an original Mutoh part, suitable for a specific range of Mutoh printers.
SKU: DG-48837
Manufacturer part number: DG-48837
Manufacturer: Mutoh
This product has been discontinued by the manufacturer. Please scroll down for more information below.
SKU: 22605114
Manufacturer part number: 22605114
Manufacturer: Roland
Agfa: Anapurna Mv and Dilli NEO Titan UVT-1606W printers can use this solution bar. This is the original Agfa oart (number D2+7130209-0009).
SKU: D2+7130209-0009
Manufacturer part number: D2+7130209-0009
Manufacturer: Agfa
This product has been discontinued by the manufacturer. Please scroll down for more information below.
SKU: ME-80609
Manufacturer part number: ME-80609
Manufacturer: Mutoh
Agfa printers are compatible with this Anapurna M2050 Conveyor Belt Wire 3.5m – D2+7910001-0077.
SKU: D2+7910001-0077
Manufacturer part number: D2+7910001-0077
Manufacturer: Agfa
Roland CJ-540 printers are compatible with this generic belt, 408P2M4-530.
SKU: 008055
Manufacturer part number: 11929138
Manufacturers: Roland , DIGIPRINT
Mimaki JV5, JV33, and UJF-3042 printers are compatible with this generic bearing.
SKU: PMEMI18835
Manufacturer part number: F699ZZ
Manufacturers: Mimaki , DIGIPRINT
This KIT FLATCABLES S75T is suitable for Summa S Class 75 cutters. This is the original Summa part (number 395-403).
Printer compatibility
Summa S-Class-75-T-Series
Mutoh VJ-1608HS printers can use this generic CR Deceleration Belt Assy.
SKU: 011011
Manufacturer part number: DG-42458
Manufacturers: DIGIPRINT , Mutoh
Mutoh Valuejet 1604 printers are compatible with this CR speed reduction belt. The original Mutoh component (DF-43940) can be found here. The circumference of this 10-millimeter-wide CR speed reduction belt is 240 millimeters.
SKU: PBEMUVJ6002
Manufacturer part number: DF-43940
Manufacturer: Mutoh
This KIT FLATCABLES S120T is suitable for Summa S Class 12 cutters. This is the original Summa part (replacing part number 395-405).
Printer compatibility
Summa S-Class-120-T-Series
Select at least 2 products
to compare
Reviews
There are no reviews yet.