This Block MES20 is suitable for Mimaki JF-1610 & JF-1631 series printers. This part includes the block only (without the rail) that corresponds to part number MES20C2R3700 & MES20C2R1480. This is the full block with ball bearings mounted in.
| Ink Type | Aqueous, Direct to Garment, DTF, Dye, Dye Sublimation, Eco-Solvent, Edible, Hard Solvent, Latex, Low Solvent, Mild Solvent, Pigment, UV, UV Curable |
|---|---|
| Printer Brand | Agfa, Brother, Canon, Epson, Fuji, Homer, HP, Kiaro, Kornit, Kyosera, Mimaki, Mutoh, Noritsu, NUR, Oce, Oki, Ricoh, Roland, Seiko, STS, Vutek |
| Printer Model | Jeti Titan 3020, Jeti Titan HS, Jeti Titan S |
| Printer Series | Jeti Mira Series, Jeti Tauro Series, Jeti Titen Series |
This product has been discontinued by the manufacturer. Please scroll down for more information below.
SKU: 1000009862
Manufacturer part number: 1000009862
Manufacturer: Roland
This ADAPTER,STAY HOLDER is suitable for Roland XC-540 printers.
SKU: 1000001550
Manufacturer part number: 1000001550
Manufacturer: Roland
Three tubes with an ID of 3 mm and an OD of 4 mm can be connected with this solvent-resistant Y connector.
SKU: PCNDI8749
Manufacturers: DIGIPRINT , Mutoh , Roland , Mimaki
This Timing Belt S2M-638 is an original Mutoh part, suitable for a specific range of Mutoh printers.
SKU: DG-46869
Manufacturer part number: DG-46869
Manufacturer: Mutoh
This L-Bearing is suitable for Roland SP-300I / VP-300 / VP-300I / VP-540 / VS-300 printers. The original Roland part (number 1000002196) can be found here. This L-Bearing is 1440 mm long.
SKU: 1000002196
Manufacturer part number: 1000002196
Manufacturer: Roland
The manufacturer has discontinued this product. Please continue reading for additional details.
SKU: 1000002483
Manufacturer part number: 1000002483
Manufacturer: Roland
Various Roland and Mimaki printers are compatible with this bearing block, QEH15SA.
SKU: QEH15SA
Manufacturer part number: QEH15SA
Manufacturers: Roland , Mimaki
This Assy, Main Board is suitable for Roland AJ-1000 printers. This is the original Roland part (number 1000000559). Printer compatibility Roland AJ-1000 Roland AJ-1000i Roland AJ-740 Roland AJ-740i Product specifications Type Main Boards
Various Roland and Mimaki printers are compatible with this bearing block, QEH15CA.
SKU: QEH15CA
Manufacturer part number: QEH15CA
Manufacturers: Roland , Mimaki
Mimaki JV33 printers are compatible with this generic Y drive belt, which is also known as a carriage belt.
SKU: PBEMIJV3301S
Manufacturer part number: M800982
Manufacturers: Mimaki , DIGIPRINT
Mimaki JV3, JV33, and JV5 series printers can use this generic speed reduction belt.
SKU: S2M-380-15MM
Manufacturer part number: 150 S2M 380G
Manufacturers: Mimaki , DIGIPRINT
Mutoh Valuejet 1604 printers are compatible with this CR speed reduction belt. The original Mutoh component (DF-43940) can be found here. The circumference of this 10-millimeter-wide CR speed reduction belt is 240 millimeters.
SKU: PBEMUVJ6002
Manufacturer part number: DF-43940
Manufacturer: Mutoh
Select at least 2 products
to compare
Reviews
There are no reviews yet.