This Block MES20 is suitable for Mimaki JF-1610 & JF-1631 series printers. This part includes the block only (without the rail) that corresponds to part number MES20C2R3700 & MES20C2R1480. This is the full block with ball bearings mounted in.
| Ink Type | Aqueous, Direct to Garment, DTF, Dye, Dye Sublimation, Eco-Solvent, Edible, Hard Solvent, Latex, Low Solvent, Mild Solvent, Pigment, UV, UV Curable |
|---|---|
| Printer Brand | Agfa, Brother, Canon, Epson, Fuji, Homer, HP, Kiaro, Kornit, Kyosera, Mimaki, Mutoh, Noritsu, NUR, Oce, Oki, Ricoh, Roland, Seiko, STS, Vutek |
| Printer Model | Jeti Titan 3020, Jeti Titan HS, Jeti Titan S |
| Printer Series | Jeti Mira Series, Jeti Tauro Series, Jeti Titen Series |
This Linear Bearing (LWES15C3R2320QE) is suitable for Roland printers.
SKU: LWES15C3R2320QE
Manufacturer part number: 21895152
Manufacturer: Roland
This generic Steel Belt (33) Assy is suitable for Mutoh Osprey printers. The Mutoh part number for this high-quality belt is DF-49599. The original Mutoh part has been discontinued. The length and width of this Steel Belt (33) Assy are 2.5 centimeters.
SKU: PMEMUOS6031O
Manufacturer part number: DF-49599
Manufacturers: DIGIPRINT , Mutoh
Mimaki printers can use this JV300 Fit Damper – M603827.
SKU: M603827
Manufacturer part number: M603827
Manufacturer: Mimaki
The Mimaki JV33 printers are compatible with this box of ten cap pads.
SKU: SPA-0161
Manufacturer part number: SPA-0161
Manufacturer: Mimaki
This Fitting .170 Elbow Barb Quick Disconnec is suitable for EFI VUTEk QS series printers. This is the original EFI part (number 45088233).
SKU: 45088233
Manufacturer part number: 45088233
Manufacturer: EFI
This LM Guide is suitable for Mimaki JV33-160 printers. This is the original Mimaki part (number SSR15xW2GE+2260LY).
SKU: SSR15XW1EW1
Manufacturer part number: SSR15XW1EW1GEV1GGEV1GE+2260LY
Manufacturer: Mimaki
Several Roland printers are compatible with this bearing block, SSR15XW1GGE (see compatibility list below).
SKU: SSR 15 X W SS G
Manufacturer part number: 1000002145
Manufacturer: Roland
Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
Various Roland and Mimaki printers are compatible with this bearing block, QEH15CA.
SKU: QEH15CA
Manufacturer part number: QEH15CA
Manufacturers: Roland , Mimaki
This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
This Assy, Main Board is suitable for Roland printers. This is the original Roland part (number 6000003126). Printer compatibility Roland GR-540 Roland GR-640 Roland GR-420 Product specifications Type Main Boards
Mutoh Valuejet 1604 printers can use this generic bearing.
SKU: PMEMUVJ002O
Manufacturer part number: KY-14620
Manufacturers: DIGIPRINT , Mutoh
Select at least 2 products
to compare
Reviews
There are no reviews yet.