This Block MES20 is suitable for Mimaki JF-1610 & JF-1631 series printers. This part includes the block only (without the rail) that corresponds to part number MES20C2R3700 & MES20C2R1480. This is the full block with ball bearings mounted in.
| Ink Type | Aqueous, Direct to Garment, DTF, Dye, Dye Sublimation, Eco-Solvent, Edible, Hard Solvent, Latex, Low Solvent, Mild Solvent, Pigment, UV, UV Curable |
|---|---|
| Printer Brand | Agfa, Brother, Canon, Epson, Fuji, Homer, HP, Kiaro, Kornit, Kyosera, Mimaki, Mutoh, Noritsu, NUR, Oce, Oki, Ricoh, Roland, Seiko, STS, Vutek |
| Printer Model | Jeti Titan 3020, Jeti Titan HS, Jeti Titan S |
| Printer Series | Jeti Mira Series, Jeti Tauro Series, Jeti Titen Series |
EFI VUTEk QS2000 Series printers can use this timing belt, which has a length of 9,14 meters (30 feet).
SKU: P5183-30.0
Manufacturer part number: P5183-30.0
Manufacturer: EFI
The Secabo S120 cutting plotters can use this carriage belt. This is the original Secabo part (number 990.0346.02). This carriage belt is 9 mm wide and 2813 mm long.
SKU: 990.0346.02
Manufacturer part number: 990.0346.02
Manufacturer: Secabo
This generic Steel Belt, 87″ Assy is suitable for Mutoh Toucan 87 printers. The Mutoh part number DF-44132, which was discontinued and is no longer available as an original part, is matched by this high-quality generic steel belt. This Steel Belt, 87″ Assy is 482.5cm long and 2.5cm wide.
SKU: PBEMUTO6002O
Manufacturer part number: DF-44132
Manufacturers: DIGIPRINT , Mutoh
Océ Arizona 6100 and Fujifilm Acuity F series printers work with this Fitting Push Tee. The original Océ component (number 3010105241) is here. The inner diameter of this fitting is 4mm (5/35″), while the outer diameter is 6.4mm (1/4″).
SKU: 3W3010105241
Manufacturer part number: 3010105241
Manufacturer: Canon Océ
For Roland printers, this L-BEARING, SSR15XW2GE+1440L is suitable. This is the original Roland part (number 1000014670).
SKU: 1000014670
Manufacturer part number: 1000014670
Manufacturer: Roland
Mimaki printers JF-1610 and JF-1631 can use this belt.
SKU: 10578
Manufacturer part number: 200S2M260UG
Manufacturer: Mimaki
This Assy, Main Board is suitable for Roland printers. This is the original Roland part (number 6000003126). Printer compatibility Roland GR-540 Roland GR-640 Roland GR-420 Product specifications Type Main Boards
Various Roland and Mimaki printers are compatible with this bearing block, QEH15CA.
SKU: QEH15CA
Manufacturer part number: QEH15CA
Manufacturers: Roland , Mimaki
This Assy, Main Board is suitable for Roland AJ-1000 printers. This is the original Roland part (number 1000000559). Printer compatibility Roland AJ-1000 Roland AJ-1000i Roland AJ-740 Roland AJ-740i Product specifications Type Main Boards
This KIT FLATCABLES S75T is suitable for Summa S Class 75 cutters. This is the original Summa part (number 395-403).
Printer compatibility
Summa S-Class-75-T-Series
Roland XJ-640 printers can use this generic belt.
SKU: PBEROXJ6001O
Manufacturer part number: 1000003688
Manufacturers: DIGIPRINT , Roland
This KIT FLATCABLES S120T is suitable for Summa S Class 12 cutters. This is the original Summa part (replacing part number 395-405).
Printer compatibility
Summa S-Class-120-T-Series
Select at least 2 products
to compare
Reviews
There are no reviews yet.