This Block MES20 is suitable for Mimaki JF-1610 & JF-1631 series printers. This part includes the block only (without the rail) that corresponds to part number MES20C2R3700 & MES20C2R1480. This is the full block with ball bearings mounted in.
| Ink Type | Aqueous, Direct to Garment, DTF, Dye, Dye Sublimation, Eco-Solvent, Edible, Hard Solvent, Latex, Low Solvent, Mild Solvent, Pigment, UV, UV Curable |
|---|---|
| Printer Brand | Agfa, Brother, Canon, Epson, Fuji, Homer, HP, Kiaro, Kornit, Kyosera, Mimaki, Mutoh, Noritsu, NUR, Oce, Oki, Ricoh, Roland, Seiko, STS, Vutek |
| Printer Model | Jeti Titan 3020, Jeti Titan HS, Jeti Titan S |
| Printer Series | Jeti Mira Series, Jeti Tauro Series, Jeti Titen Series |
Mutoh Osprey 102 printers can use this generic Steel Belt (26) Assy. A high-quality generic part that is comparable to the Mutoh part (number DF-47848) The length and width of this Steel Belt (26) Assy are 2.5 centimeters. Due to its discontinuation, this belt is no longer available from Mutoh.
SKU: PMEMUOS6016O
Manufacturer part number: DF-47848
Manufacturer: Mutoh
Marabu ClearShield Select, Satin – 1L
SKU: 360297213
Manufacturer part number: 360297213
Manufacturer: Marabu
This CR Belt fastener is suitable for Mutoh Valuejet 1304 printers. This is the original Mutoh part (number DG-41144).
SKU: DG-41144
Manufacturer part number: DG-41144
Manufacturer: Mutoh
This Flushing Waste Fluid Receiver is suitable for Mutoh VJ-1614 printers. This is the original Mutoh part (number DE-36933).
SKU: DE-36933
Manufacturer part number: DE-36933
Manufacturer: Mutoh
This original Mutoh F Fitting (10 pieces per box) is suitable for a specific Mutoh printer line.
SKU: DG-49572
Manufacturer part number: DG-49572
Manufacturer: Mutoh
The Seiko ColorPainter V-64S and W series printers can use this Cap 64 Assy.
SKU: U00100760500
Manufacturer part number: U00100760500
Manufacturer: Oki
Mutoh Valuejet 1604 printers are compatible with this steel belt.
SKU: DF-43937
Manufacturer part number: DF-43937
Manufacturer: Mutoh
Several Roland printers are compatible with this bearing block, SSR15XW1GGE (see compatibility list below).
SKU: SSR 15 X W SS G
Manufacturer part number: 1000002145
Manufacturer: Roland
Various Roland and Mimaki printers are compatible with this bearing block, QEH15CA.
SKU: QEH15CA
Manufacturer part number: QEH15CA
Manufacturers: Roland , Mimaki
For some Roland printers, this generic bearing block, SSR15XW1UUE, is suitable.
SKU: PMERO17713
Manufacturer part number: 21895154
Manufacturers: Roland , DIGIPRINT
Mimaki JV33 printers are compatible with this generic Y drive belt, which is also known as a carriage belt.
SKU: PBEMIJV3301S
Manufacturer part number: M800982
Manufacturers: Mimaki , DIGIPRINT
Mutoh Valuejet 1604 printers are compatible with this CR speed reduction belt. The original Mutoh component (DF-43940) can be found here. The circumference of this 10-millimeter-wide CR speed reduction belt is 240 millimeters.
SKU: PBEMUVJ6002
Manufacturer part number: DF-43940
Manufacturer: Mutoh
Select at least 2 products
to compare
Reviews
There are no reviews yet.