This Block MES20 is suitable for Mimaki JF-1610 & JF-1631 series printers. This part includes the block only (without the rail) that corresponds to part number MES20C2R3700 & MES20C2R1480. This is the full block with ball bearings mounted in.
| Ink Type | Aqueous, Direct to Garment, DTF, Dye, Dye Sublimation, Eco-Solvent, Edible, Hard Solvent, Latex, Low Solvent, Mild Solvent, Pigment, UV, UV Curable |
|---|---|
| Printer Brand | Agfa, Brother, Canon, Epson, Fuji, Homer, HP, Kiaro, Kornit, Kyosera, Mimaki, Mutoh, Noritsu, NUR, Oce, Oki, Ricoh, Roland, Seiko, STS, Vutek |
| Printer Model | Jeti Titan 3020, Jeti Titan HS, Jeti Titan S |
| Printer Series | Jeti Mira Series, Jeti Tauro Series, Jeti Titen Series |
A wide range of Epson XP600/TX800 printhead-based DTF printers can use this generic capping unit.
SKU: PCAEPXP603
Manufacturers: Epson , DIGIPRINT
Mutoh Valuejet 2628TD printers are compatible with this steel belt. This is the original Mutoh part (number DG-40324). This Steel Belt is 693.5cm long and 2.5cm wide.
SKU: DG-40324
Manufacturer part number: DG-40324
Manufacturer: Mutoh
This set of 20 solvent resistant black nylon straight through reduction fitting is suitable for all wide format inkjet printers printers.
SKU: 2040-2/20
Manufacturer: DIGIPRINT
This product has been discontinued by the manufacturer. Please continue reading for additional details.
SKU: 11929120
Manufacturer part number: 11929120
Manufacturer: Roland
This product has been discontinued by the manufacturer. Please scroll down for more information below.
SKU: 1000011039
Manufacturer part number: 1000011039
Manufacturer: Roland
Mutoh RJ-900C printers are compatible with this three-way joint new type.
SKU: DG-42727
Manufacturer part number: DG-42727
Manufacturer: Mutoh
Mimaki JV5, JV33, and UJF-3042 printers are compatible with this generic bearing.
SKU: PMEMI18835
Manufacturer part number: F699ZZ
Manufacturers: Mimaki , DIGIPRINT
Summa SummaSign cutters are compatible with this BELT X-MOTOR 110T, W=0.25.
SKU: 007828
Manufacturer part number: MB9124
Manufacturer: Summa
This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
Roland XJ-640 printers can use this generic belt.
SKU: PBEROXJ6001O
Manufacturer part number: 1000003688
Manufacturers: DIGIPRINT , Roland
Several Roland printers are compatible with this bearing block, SSR15XW1GGE (see compatibility list below).
SKU: SSR 15 X W SS G
Manufacturer part number: 1000002145
Manufacturer: Roland
This KIT FLATCABLES S120T is suitable for Summa S Class 12 cutters. This is the original Summa part (replacing part number 395-405).
Printer compatibility
Summa S-Class-120-T-Series
Select at least 2 products
to compare
Reviews
There are no reviews yet.