This Block MES20 is suitable for Mimaki JF-1610 & JF-1631 series printers. This part includes the block only (without the rail) that corresponds to part number MES20C2R3700 & MES20C2R1480. This is the full block with ball bearings mounted in.
| Ink Type | Aqueous, Direct to Garment, DTF, Dye, Dye Sublimation, Eco-Solvent, Edible, Hard Solvent, Latex, Low Solvent, Mild Solvent, Pigment, UV, UV Curable |
|---|---|
| Printer Brand | Agfa, Brother, Canon, Epson, Fuji, Homer, HP, Kiaro, Kornit, Kyosera, Mimaki, Mutoh, Noritsu, NUR, Oce, Oki, Ricoh, Roland, Seiko, STS, Vutek |
| Printer Model | Jeti Titan 3020, Jeti Titan HS, Jeti Titan S |
| Printer Series | Jeti Mira Series, Jeti Tauro Series, Jeti Titen Series |
This Tube Fitting (Female) is an original Mutoh part, suitable for a specific range of Mutoh printers.
SKU: DG-48837
Manufacturer part number: DG-48837
Manufacturer: Mutoh
The manufacturer has discontinued this product. Please scroll down for more information below.
SKU: 1000007836
Manufacturer part number: 1000007836
Manufacturer: Roland
The Secabo S120 cutting plotters can use this carriage belt. This is the original Secabo part (number 990.0346.02). This carriage belt has a width of 9 mm and a length of 2813 mm.
SKU: 990.0346.04
Manufacturer part number: 990.0346.04
Manufacturer: Secabo
The Roland FJ-540 / FP-740 waterbased printer’s capping station is compatible with this foam cap top in black. Long-lasting performance is provided by this cap top, which is designed specifically for Roland printers and water-based inks.
SKU: PCAROWB004
Manufacturers: DIGIPRINT , Roland
Mimaki printers can use this UJF-7151 Cap Slider Assembly – M017352.
SKU: M017352
Manufacturer part number: M017352
Manufacturer: Mimaki
The manufacturer has discontinued this product. Please continue reading for additional details.
SKU: 1000016917
Manufacturer part number: 1000016917
Manufacturer: Roland
Specific printers can use this carriage drive timing belt.
SKU: 88S3M312
Manufacturer: DIGIPRINT
Several Roland printers are compatible with this bearing block, SSR15XW1GGE (see compatibility list below).
SKU: SSR 15 X W SS G
Manufacturer part number: 1000002145
Manufacturer: Roland
Mimaki JV3, JV33, and JV5 series printers can use this generic speed reduction belt.
SKU: S2M-380-15MM
Manufacturer part number: 150 S2M 380G
Manufacturers: Mimaki , DIGIPRINT
Mutoh Valuejet 1604 printers are compatible with this steel belt.
SKU: DF-43937
Manufacturer part number: DF-43937
Manufacturer: Mutoh
Mimaki JV3, JV33, and JV5 series printers are compatible with this generic speed reduction belt.
SKU: PBEMIJV305O
Manufacturer part number: 150 S2M 380G
Manufacturer: DIGIPRINT
Summa SummaSign cutters are compatible with this BELT X-MOTOR 110T, W=0.25.
SKU: 007828
Manufacturer part number: MB9124
Manufacturer: Summa
Select at least 2 products
to compare
Reviews
There are no reviews yet.