This Block MES20 is suitable for Mimaki JF-1610 & JF-1631 series printers. This part includes the block only (without the rail) that corresponds to part number MES20C2R3700 & MES20C2R1480. This is the full block with ball bearings mounted in.
| Ink Type | Aqueous, Direct to Garment, DTF, Dye, Dye Sublimation, Eco-Solvent, Edible, Hard Solvent, Latex, Low Solvent, Mild Solvent, Pigment, UV, UV Curable |
|---|---|
| Printer Brand | Agfa, Brother, Canon, Epson, Fuji, Homer, HP, Kiaro, Kornit, Kyosera, Mimaki, Mutoh, Noritsu, NUR, Oce, Oki, Ricoh, Roland, Seiko, STS, Vutek |
| Printer Model | Jeti Titan 3020, Jeti Titan HS, Jeti Titan S |
| Printer Series | Jeti Mira Series, Jeti Tauro Series, Jeti Titen Series |
This L-Bearing is suitable for Roland VS-640 printers. The original Roland component can be found here (number 1000006512). This L-Bearing is 2.32m long.
SKU: 1000006512
Manufacturer part number: 1000006512
Manufacturer: Roland
Mimaki JFX500-2131 and UJV500-160 printers are compatible with this Cap Base Assy U.
SKU: M015205
Manufacturer part number: M015205
Manufacturer: Mimaki
Roland FJ-540 printers are suitable for this Belt, 516P2M4-530.
SKU: 1000000382
Manufacturer part number: 1000000382
Manufacturer: Roland
Mimaki JV5-160S Printers are compatible with this Y Drive Belt 5.
SKU: M800885
Manufacturer part number: M800885
Manufacturer: Mimaki
Mimaki JV33 printers are compatible with this 2 T Joint M6. This is the original part from Mimaki, number M602148.
SKU: M602148
Manufacturer part number: M602148
Manufacturer: Mimaki
Mimaki printers can use this UJF-3042 Cap rubber R – M700652.
SKU: M700652
Manufacturer part number: M700652
Manufacturer: Mimaki
Mimaki JV3, JV33, and JV5 series printers can use this generic speed reduction belt.
SKU: S2M-380-15MM
Manufacturer part number: 150 S2M 380G
Manufacturers: Mimaki , DIGIPRINT
Printers in the CJV300, CJV150, JV150, and JV300 series can use this timing belt.
SKU: 10379
Manufacturer part number: 100S2M210
Manufacturer: Mimaki
Mutoh Valuejet 1604 printers are compatible with this CR speed reduction belt. The original Mutoh component (DF-43940) can be found here. The circumference of this 10-millimeter-wide CR speed reduction belt is 240 millimeters.
SKU: PBEMUVJ6002
Manufacturer part number: DF-43940
Manufacturer: Mutoh
Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
Mutoh Valuejet 1604 printers are compatible with this steel belt.
SKU: DF-43937
Manufacturer part number: DF-43937
Manufacturer: Mutoh
Various Roland and Mimaki printers are compatible with this bearing block, QEH15SA.
SKU: QEH15SA
Manufacturer part number: QEH15SA
Manufacturers: Roland , Mimaki
Select at least 2 products
to compare
Reviews
There are no reviews yet.