This Block MES20 is suitable for Mimaki JF-1610 & JF-1631 series printers. This part includes the block only (without the rail) that corresponds to part number MES20C2R3700 & MES20C2R1480. This is the full block with ball bearings mounted in.
| Ink Type | Aqueous, Direct to Garment, DTF, Dye, Dye Sublimation, Eco-Solvent, Edible, Hard Solvent, Latex, Low Solvent, Mild Solvent, Pigment, UV, UV Curable |
|---|---|
| Printer Brand | Agfa, Brother, Canon, Epson, Fuji, Homer, HP, Kiaro, Kornit, Kyosera, Mimaki, Mutoh, Noritsu, NUR, Oce, Oki, Ricoh, Roland, Seiko, STS, Vutek |
| Printer Model | Jeti Titan 3020, Jeti Titan HS, Jeti Titan S |
| Printer Series | Jeti Mira Series, Jeti Tauro Series, Jeti Titen Series |
This solvent resistant adapter connects a tube of ID: 3mm OD: 4mm to a tube of ID: 2mm, OD: 3mm (o-ring included).
SKU: PADDI8755
Manufacturers: DIGIPRINT , Mutoh , Roland , Mimaki
For VUTEk GS-Series printers, this set of 10 Fitting Luer -> 3/32 Female is suitable. These connectors have a female ISO Luer lock on one side and an 3/32 inch tube hose barb on the other side. This is the original VUTEk part (number P2122-A).
SKU: PCNVU12631
Manufacturer part number: P2122-A
Manufacturer: EFI
This BELT,150S2M2459LW-C is suitable for Roland printers. The original Roland part in question is this one (number 1000015650).
SKU: 1000015650
Manufacturer part number: 1000015650
Manufacturer: Roland
This JF Series Cap Base – M400287 is suitable for Mimaki printers.
SKU: M400287
Manufacturer part number: M400287
Manufacturer: Mimaki
This ADAPTER,JOINT 3L is an original Roland part, suitable for a specific range of Roland printers.
SKU: 1000017901
Manufacturer part number: 1000017901
Manufacturer: Roland
This pulley belt 40 S2M 754UG is suitable for Mimaki JV3 printers.
SKU: 007737
Manufacturer: Mimaki
Mimaki JV3, JV33, and JV5 series printers are compatible with this generic speed reduction belt.
SKU: PBEMIJV305O
Manufacturer part number: 150 S2M 380G
Manufacturer: DIGIPRINT
Specific printers can use this carriage drive timing belt.
SKU: 88S3M312
Manufacturer: DIGIPRINT
Mimaki JV3, JV33, and JV5 series printers can use this generic speed reduction belt.
SKU: S2M-380-15MM
Manufacturer part number: 150 S2M 380G
Manufacturers: Mimaki , DIGIPRINT
This Assy, Pinch Org Board is suitable for Roland AJ-1000 printers. This is the original Roland part (number W700105720).
Printer compatibility
Roland AJ-1000
Roland AJ-1000i
Roland AJ-740
Roland AJ-740i
Product specifications
For some Roland printers, this generic bearing block, SSR15XW1UUE, is suitable.
SKU: PMERO17713
Manufacturer part number: 21895154
Manufacturers: Roland , DIGIPRINT
Various Roland and Mimaki printers are compatible with this bearing block, QEH15CA.
SKU: QEH15CA
Manufacturer part number: QEH15CA
Manufacturers: Roland , Mimaki
Select at least 2 products
to compare
Reviews
There are no reviews yet.