This Block MES20 is suitable for Mimaki JF-1610 & JF-1631 series printers. This part includes the block only (without the rail) that corresponds to part number MES20C2R3700 & MES20C2R1480. This is the full block with ball bearings mounted in.
| Ink Type | Aqueous, Direct to Garment, DTF, Dye, Dye Sublimation, Eco-Solvent, Edible, Hard Solvent, Latex, Low Solvent, Mild Solvent, Pigment, UV, UV Curable |
|---|---|
| Printer Brand | Agfa, Brother, Canon, Epson, Fuji, Homer, HP, Kiaro, Kornit, Kyosera, Mimaki, Mutoh, Noritsu, NUR, Oce, Oki, Ricoh, Roland, Seiko, STS, Vutek |
| Printer Model | Jeti Titan 3020, Jeti Titan HS, Jeti Titan S |
| Printer Series | Jeti Mira Series, Jeti Tauro Series, Jeti Titen Series |
A wide range of Epson I3200/I1600 printhead-based DTF printers can use this generic capping unit.
SKU: PCAEP87850
Manufacturer part number: PCAEP87850
Manufacturers: DIGIPRINT , Epson
This product has been discontinued by the manufacturer. Please continue reading for additional details.
SKU: 1000016070
Manufacturer part number: 1000016070
Manufacturer: Roland
This generic foam cap top of high quality fits the capping station of Roland Soljet and Versacamm printers as well as Mutoh Rockhopper II, Falcon II, and Spitfire.
SKU: PCAROSJ006
Manufacturers: DIGIPRINT , Roland , Mutoh
The manufacturer has discontinued this product. Please continue reading for additional details.
SKU: 1000005124
Manufacturer part number: 1000005124
Manufacturer: Roland
Mimaki printers are compatible with this UJF-7151 Plus Cap Rubber – M700970.
SKU: M700970
Manufacturer part number: M700970
Manufacturer: Mimaki
This Ink Capping Station is compatible with a wide range of DTF printers based on Epson Stylus Photo 1390 / 1400 / 1410 printhead.
SKU: PCAEP3901
Manufacturer: Epson
Mutoh VJ-1608HS printers can use this generic CR Deceleration Belt Assy.
SKU: 011011
Manufacturer part number: DG-42458
Manufacturers: DIGIPRINT , Mutoh
Roland CJ-540 printers are compatible with this generic belt, 408P2M4-530.
SKU: 008055
Manufacturer part number: 11929138
Manufacturers: Roland , DIGIPRINT
This Assy, Main Board is suitable for Roland AJ-1000 printers. This is the original Roland part (number 1000000559). Printer compatibility Roland AJ-1000 Roland AJ-1000i Roland AJ-740 Roland AJ-740i Product specifications Type Main Boards
This KIT FLATCABLES S120T is suitable for Summa S Class 12 cutters. This is the original Summa part (replacing part number 395-405).
Printer compatibility
Summa S-Class-120-T-Series
Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
Roland XJ-640 printers can use this generic belt.
SKU: PBEROXJ6001O
Manufacturer part number: 1000003688
Manufacturers: DIGIPRINT , Roland
Select at least 2 products
to compare
Reviews
There are no reviews yet.