This Block MES20 is suitable for Mimaki JF-1610 & JF-1631 series printers. This part includes the block only (without the rail) that corresponds to part number MES20C2R3700 & MES20C2R1480. This is the full block with ball bearings mounted in.
| Ink Type | Aqueous, Direct to Garment, DTF, Dye, Dye Sublimation, Eco-Solvent, Edible, Hard Solvent, Latex, Low Solvent, Mild Solvent, Pigment, UV, UV Curable |
|---|---|
| Printer Brand | Agfa, Brother, Canon, Epson, Fuji, Homer, HP, Kiaro, Kornit, Kyosera, Mimaki, Mutoh, Noritsu, NUR, Oce, Oki, Ricoh, Roland, Seiko, STS, Vutek |
| Printer Model | Jeti Titan 3020, Jeti Titan HS, Jeti Titan S |
| Printer Series | Jeti Mira Series, Jeti Tauro Series, Jeti Titen Series |
Mutoh RJ-8000 printers are suitable for this CR Speed Reduction Belt.
SKU: 009121
Manufacturer part number: DF-43621
Manufacturer: Mutoh
This product has been discontinued by the manufacturer. Please scroll down for more information below.
SKU: 22605117
Manufacturer part number: 22605117
Manufacturer: Roland
Protecting your prints, fine art, signs, banners, photographic output, awnings, and other products from UV rays, abrasion, and marring is simple and affordable with Marabu ClearJet®.
SKU: 360363001
Manufacturer part number: 360363001
Manufacturer: Marabu
This Mini Fitting T Shape is suitable for Mutoh Albatros printers. The original Mutoh component (number E-VPT306) is here.
SKU: E-VPT306
Manufacturer part number: E-VPT306
Manufacturer: Mutoh
This Pulley Belt is suitable for Mimaki JV5 Series printers. This is the original Mimaki part (number 40S2M520). This Pulley Belt has a circumference of 51.4cm and is 0.4cm wide.
SKU: PBEMI11129
Manufacturer part number: 40S2M520
Manufacturer: Mimaki
This Belt Flat M 50.8x 0.127 x 78242 301 is suitable for Océ Arizona 440 GT / XT printers. The original Océ component (number 3010112872) is here. This steel belt has a total length of 8260mm and is 50mm wide.
SKU: 3W3010112872
Manufacturer part number: 3010112872
Manufacturer: Canon Océ
Summa SummaSign cutters are compatible with this BELT X-MOTOR 110T, W=0.25.
SKU: 007828
Manufacturer part number: MB9124
Manufacturer: Summa
For some Roland printers, this generic bearing block, SSR15XW1UUE, is suitable.
SKU: PMERO17713
Manufacturer part number: 21895154
Manufacturers: Roland , DIGIPRINT
Various Roland and Mimaki printers are compatible with this bearing block, QEH15CA.
SKU: QEH15CA
Manufacturer part number: QEH15CA
Manufacturers: Roland , Mimaki
Mimaki JV3, JV33, and JV5 series printers can use this generic speed reduction belt.
SKU: S2M-380-15MM
Manufacturer part number: 150 S2M 380G
Manufacturers: Mimaki , DIGIPRINT
This KIT FLATCABLES S120T is suitable for Summa S Class 12 cutters. This is the original Summa part (replacing part number 395-405).
Printer compatibility
Summa S-Class-120-T-Series
Summa SummaSign cutters are compatible with this BELT Y-MOTOR 150T.
SKU: 004612
Manufacturer part number: MB0380
Manufacturer: Summa
Select at least 2 products
to compare
Reviews
There are no reviews yet.