This Block MES20 is suitable for Mimaki JF-1610 & JF-1631 series printers. This part includes the block only (without the rail) that corresponds to part number MES20C2R3700 & MES20C2R1480. This is the full block with ball bearings mounted in.
| Ink Type | Aqueous, Direct to Garment, DTF, Dye, Dye Sublimation, Eco-Solvent, Edible, Hard Solvent, Latex, Low Solvent, Mild Solvent, Pigment, UV, UV Curable |
|---|---|
| Printer Brand | Agfa, Brother, Canon, Epson, Fuji, Homer, HP, Kiaro, Kornit, Kyosera, Mimaki, Mutoh, Noritsu, NUR, Oce, Oki, Ricoh, Roland, Seiko, STS, Vutek |
| Printer Model | Jeti Titan 3020, Jeti Titan HS, Jeti Titan S |
| Printer Series | Jeti Mira Series, Jeti Tauro Series, Jeti Titen Series |
This 2,56m long LM Guide (2 blocks) is suitable for Mimaki JV5-130S printers. This is the original Mimaki part (number SSR15XW2GC1F+2560LYF ).
SKU: SSR15XW2GC1F+2560LYF
Manufacturer part number: SSR15XW2GC1F+2560LYF
Manufacturer: Mimaki
The Secabo S120 cutting plotters can use this carriage belt. This is the original Secabo part (number 990.0346.02). This carriage belt has a width of 9 mm and a length of 2813 mm.
SKU: 990.0346.04
Manufacturer part number: 990.0346.04
Manufacturer: Secabo
This product has been discontinued by the manufacturer. Please continue reading for additional details.
SKU: 1000005409
Manufacturer part number: 1000005409
Manufacturer: Roland
This product has been discontinued by the manufacturer. Please scroll down for more information below.
SKU: 1000005197
Manufacturer part number: 1000005197
Manufacturer: Roland
This product has been discontinued by the manufacturer. Please scroll down for more information below.
SKU: 1000009862
Manufacturer part number: 1000009862
Manufacturer: Roland
This L-BEARING HSR15R2SSE+280L-2 is suitable for Roland printers. This is the original Roland part (number 21895130).
SKU: 21895130
Manufacturer part number: 21895130
Manufacturer: Roland
Roland XJ-640 printers can use this generic belt.
SKU: PBEROXJ6001O
Manufacturer part number: 1000003688
Manufacturers: DIGIPRINT , Roland
This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
Various Roland and Mimaki printers are compatible with this bearing block, QEH15SA.
SKU: QEH15SA
Manufacturer part number: QEH15SA
Manufacturers: Roland , Mimaki
This product has been discontinued by the manufacturer. Please continue reading for additional details.
SKU: M800982
Manufacturer part number: M800982
Manufacturer: Mimaki
Roland CJ-540 printers are compatible with this generic belt, 408P2M4-530.
SKU: 008055
Manufacturer part number: 11929138
Manufacturers: Roland , DIGIPRINT
Mimaki JV5, JV33, and UJF-3042 printers are compatible with this generic bearing.
SKU: PMEMI18835
Manufacturer part number: F699ZZ
Manufacturers: Mimaki , DIGIPRINT
Select at least 2 products
to compare
Reviews
There are no reviews yet.