This Block MES20 is suitable for Mimaki JF-1610 & JF-1631 series printers. This part includes the block only (without the rail) that corresponds to part number MES20C2R3700 & MES20C2R1480. This is the full block with ball bearings mounted in.
| Ink Type | Aqueous, Direct to Garment, DTF, Dye, Dye Sublimation, Eco-Solvent, Edible, Hard Solvent, Latex, Low Solvent, Mild Solvent, Pigment, UV, UV Curable |
|---|---|
| Printer Brand | Agfa, Brother, Canon, Epson, Fuji, Homer, HP, Kiaro, Kornit, Kyosera, Mimaki, Mutoh, Noritsu, NUR, Oce, Oki, Ricoh, Roland, Seiko, STS, Vutek |
| Printer Model | Jeti Titan 3020, Jeti Titan HS, Jeti Titan S |
| Printer Series | Jeti Mira Series, Jeti Tauro Series, Jeti Titen Series |
Marabu Clearshield® Classic is a water-based liquid coating with a low viscosity that provides enhanced UV protection as well as chemical and abrasion resistance. can be applied with a brush, roller, or automated spray equipment or by hand. If you’re looking for a laminate with a lower viscosity, Classic Lite is an option that provides the same excellent protection as ClearShield Classic.
SKU: 360298811
Manufacturer part number: 360298811
This L-bearing assembly is suitable for Roland SP-300 printers. This is the original Roland part (number 21895157). This bearingis only sold as a whole and includes the bearings located on the left side of the head carriage.
SKU: 21895157
Manufacturer part number: 21895157
Manufacturer: Roland
The manufacturer has discontinued this product. Please scroll down for more information below.
SKU: 1000000195
Manufacturer part number: 1000000195
Manufacturer: Roland
This original Roland part, the FITTING,TUBE PP VFY206, is suitable for a specific line of Roland printers.
SKU: 1000002095
Manufacturer part number: 1000002095
Manufacturer: Roland
This Adjuster, M12*60*103 is suitable for Roland LEJ-640 printers. This is the original Roland part (number 1000009360).
SKU: 1000009360
Manufacturer part number: 1000009360
Manufacturer: Roland
Roland VS-420 printers can use this generic belt. The Roland part number 1000007235 is matched by this generic component. This belt is 15 mm wide and 3078 mm long.
SKU: PBERO12359O
Manufacturer part number: 1000007235
Manufacturers: DIGIPRINT , Roland
Mutoh Valuejet 1604 printers are compatible with this steel belt.
SKU: DF-43937
Manufacturer part number: DF-43937
Manufacturer: Mutoh
Mimaki JV3, JV33, and JV5 series printers are compatible with this generic speed reduction belt.
SKU: PBEMIJV305O
Manufacturer part number: 150 S2M 380G
Manufacturer: DIGIPRINT
Mutoh VJ-1608HS printers can use this generic CR Deceleration Belt Assy.
SKU: 011011
Manufacturer part number: DG-42458
Manufacturers: DIGIPRINT , Mutoh
Specific printers can use this carriage drive timing belt.
SKU: 88S3M312
Manufacturer: DIGIPRINT
Mutoh Valuejet 1604 printers can use this generic bearing.
SKU: PMEMUVJ002O
Manufacturer part number: KY-14620
Manufacturers: DIGIPRINT , Mutoh
Printers in the CJV300, CJV150, JV150, and JV300 series can use this timing belt.
SKU: 10379
Manufacturer part number: 100S2M210
Manufacturer: Mimaki
Select at least 2 products
to compare
Reviews
There are no reviews yet.