This Block MES20 is suitable for Mimaki JF-1610 & JF-1631 series printers. This part includes the block only (without the rail) that corresponds to part number MES20C2R3700 & MES20C2R1480. This is the full block with ball bearings mounted in.
| Ink Type | Aqueous, Direct to Garment, DTF, Dye, Dye Sublimation, Eco-Solvent, Edible, Hard Solvent, Latex, Low Solvent, Mild Solvent, Pigment, UV, UV Curable |
|---|---|
| Printer Brand | Agfa, Brother, Canon, Epson, Fuji, Homer, HP, Kiaro, Kornit, Kyosera, Mimaki, Mutoh, Noritsu, NUR, Oce, Oki, Ricoh, Roland, Seiko, STS, Vutek |
| Printer Model | Jeti Titan 3020, Jeti Titan HS, Jeti Titan S |
| Printer Series | Jeti Mira Series, Jeti Tauro Series, Jeti Titen Series |
For Roland BN-20 printers, this Bearing, Plastic Do-22-H6 is appropriate. The original Roland part in this case is number 1000008824.
SKU: 1000008824
Manufacturer part number: 1000008824
Manufacturer: Roland
SKU: AKC26H-ND
Manufacturer part number: AKC26H-ND
Manufacturer: DIGIPRINT
The AGFA:Anapurna M printers can use this SR19 coupling. It is used in the print head lifting mechanism. This is the original Agfa component (number D2+7350101-0001 has been substituted for D2+2102083). This SR19 coupling has an inner diameter of 5.98mm and an outer diameter of 19.11mm.
SKU: SRB-19-6-5
Manufacturer part number: D2+7350101-0001
Manufacturer: Agfa
This product has been discontinued by the manufacturer. Please continue reading for additional details.
SKU: 1000003882
Manufacturer part number: 1000003882
Manufacturer: Roland
This Bearing Flanged is an original Roland part, suitable for a specific range of Roland printers.
SKU: MP601608
Manufacturer part number: MP601608
Manufacturer: Roland
This Guide Bearing NO.2 is suitable for all Roland printers.
SKU: 22175741
Manufacturer part number: 22175741
Manufacturer: Roland
For some Roland printers, this generic bearing block, SSR15XW1UUE, is suitable.
SKU: PMERO17713
Manufacturer part number: 21895154
Manufacturers: Roland , DIGIPRINT
This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
Mimaki JV3, JV33, and JV5 series printers are compatible with this generic speed reduction belt.
SKU: PBEMIJV305O
Manufacturer part number: 150 S2M 380G
Manufacturer: DIGIPRINT
Mutoh Valuejet 1604 printers are compatible with this steel belt.
SKU: DF-43937
Manufacturer part number: DF-43937
Manufacturer: Mutoh
Mimaki JV3, JV33, and JV5 series printers can use this generic speed reduction belt.
SKU: S2M-380-15MM
Manufacturer part number: 150 S2M 380G
Manufacturers: Mimaki , DIGIPRINT
Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
Select at least 2 products
to compare
Reviews
There are no reviews yet.