This Block MES20 is suitable for Mimaki JF-1610 & JF-1631 series printers. This part includes the block only (without the rail) that corresponds to part number MES20C2R3700 & MES20C2R1480. This is the full block with ball bearings mounted in.
| Ink Type | Aqueous, Direct to Garment, DTF, Dye, Dye Sublimation, Eco-Solvent, Edible, Hard Solvent, Latex, Low Solvent, Mild Solvent, Pigment, UV, UV Curable |
|---|---|
| Printer Brand | Agfa, Brother, Canon, Epson, Fuji, Homer, HP, Kiaro, Kornit, Kyosera, Mimaki, Mutoh, Noritsu, NUR, Oce, Oki, Ricoh, Roland, Seiko, STS, Vutek |
| Printer Model | Jeti Titan 3020, Jeti Titan HS, Jeti Titan S |
| Printer Series | Jeti Mira Series, Jeti Tauro Series, Jeti Titen Series |
This set of 20 solvent resistant white nylon luer male fittings is suitable for all wide format inkjet printers printers.
SKU: MTLL420-1/20
Manufacturer: DIGIPRINT
Seiko Colorpainter H-74s printers are compatible with this Capping Station (HV).
SKU: U00112509000
Manufacturer part number: U00112509000
Manufacturer: Oki
This wiper belt 40 S2M 288G is suitable for Mimaki JV4 / TX2 printers.
SKU: PBEMIJV401S
Manufacturers: Mimaki , DIGIPRINT
This generic damper joint assy is suitable for Mimaki JV34-260 printers.
SKU: PCNMI14113O
Manufacturer part number: M010793
Manufacturers: DIGIPRINT , Mimaki
This Waste Fluid Bottle is suitable for Mutoh Osprey and Valuejet printers.
SKU: DG-43501
Manufacturer part number: DG-43501
Manufacturer: Mutoh
The VUTEk QS-series, PressVU 200/600, and VUTEk UltraVU 150 are all compatible with this set of 20 Fitting Luer 1/8 Female.
SKU: FTLB230-6005/20
Manufacturer part number: P1923-A
Manufacturer: EFI
Summa SummaSign cutters are compatible with this BELT Y-MOTOR 150T.
SKU: 004612
Manufacturer part number: MB0380
Manufacturer: Summa
Mutoh VJ-1608HS printers can use this generic CR Deceleration Belt Assy.
SKU: 011011
Manufacturer part number: DG-42458
Manufacturers: DIGIPRINT , Mutoh
Roland XJ-640 printers can use this generic belt.
SKU: PBEROXJ6001O
Manufacturer part number: 1000003688
Manufacturers: DIGIPRINT , Roland
This KIT FLATCABLES S75T is suitable for Summa S Class 75 cutters. This is the original Summa part (number 395-403).
Printer compatibility
Summa S-Class-75-T-Series
Printers in the CJV300, CJV150, JV150, and JV300 series can use this timing belt.
SKU: 10379
Manufacturer part number: 100S2M210
Manufacturer: Mimaki
This Assy, Pinch Org Board is suitable for Roland AJ-1000 printers. This is the original Roland part (number W700105720).
Printer compatibility
Roland AJ-1000
Roland AJ-1000i
Roland AJ-740
Roland AJ-740i
Product specifications
Select at least 2 products
to compare
Reviews
There are no reviews yet.