This Block MES20 is suitable for Mimaki JF-1610 & JF-1631 series printers. This part includes the block only (without the rail) that corresponds to part number MES20C2R3700 & MES20C2R1480. This is the full block with ball bearings mounted in.
| Ink Type | Aqueous, Direct to Garment, DTF, Dye, Dye Sublimation, Eco-Solvent, Edible, Hard Solvent, Latex, Low Solvent, Mild Solvent, Pigment, UV, UV Curable |
|---|---|
| Printer Brand | Agfa, Brother, Canon, Epson, Fuji, Homer, HP, Kiaro, Kornit, Kyosera, Mimaki, Mutoh, Noritsu, NUR, Oce, Oki, Ricoh, Roland, Seiko, STS, Vutek |
| Printer Model | Jeti Titan 3020, Jeti Titan HS, Jeti Titan S |
| Printer Series | Jeti Mira Series, Jeti Tauro Series, Jeti Titen Series |
The manufacturer has discontinued this product. Please scroll down for more information below.
SKU: 1000017082
Manufacturer part number: 1000017082
Manufacturer: Roland
Mimaki printers can use this UJF-3042 Cap rubber R – M700652.
SKU: M700652
Manufacturer part number: M700652
Manufacturer: Mimaki
This generic steel belt (64) is suitable for Seiko Colorpainter 64S and HP Designjet 9000 printers. This generic part, which is the same as Seiko part number U00101625600, is of excellent quality. This belt is 468.5cm long and 2.5cm wide.
SKU: PBESECP0040
Manufacturer part number: U00101625600
Manufacturers: DIGIPRINT , Oki
This steel belt (64) is suitable for Seiko Colorpainter 64S and HP Designjet 9000 printers.
SKU: U00101625600
Manufacturer part number: U00101625600
Manufacturer: Oki
The manufacturer has discontinued this product. Please scroll down for more information below.
SKU: 13369898
Manufacturer part number: 13369898
Manufacturer: Roland
This CAP, APRON R is an original Roland part, suitable for a specific range of Roland printers.
SKU: 1000020209
Manufacturer part number: 1000020209
Manufacturer: Roland
Roland XJ-640 printers can use this generic belt.
SKU: PBEROXJ6001O
Manufacturer part number: 1000003688
Manufacturers: DIGIPRINT , Roland
Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
Specific printers can use this carriage drive timing belt.
SKU: 88S3M312
Manufacturer: DIGIPRINT
Mimaki JV3, JV33, and JV5 series printers can use this generic speed reduction belt.
SKU: S2M-380-15MM
Manufacturer part number: 150 S2M 380G
Manufacturers: Mimaki , DIGIPRINT
Mutoh Valuejet 1604 printers are compatible with this CR speed reduction belt. The original Mutoh component (DF-43940) can be found here. The circumference of this 10-millimeter-wide CR speed reduction belt is 240 millimeters.
SKU: PBEMUVJ6002
Manufacturer part number: DF-43940
Manufacturer: Mutoh
This Assy, Main Board is suitable for Roland printers. This is the original Roland part (number 6000003126). Printer compatibility Roland GR-540 Roland GR-640 Roland GR-420 Product specifications Type Main Boards
Select at least 2 products
to compare
Reviews
There are no reviews yet.