This Block MES20 is suitable for Mimaki JF-1610 & JF-1631 series printers. This part includes the block only (without the rail) that corresponds to part number MES20C2R3700 & MES20C2R1480. This is the full block with ball bearings mounted in.
| Ink Type | Aqueous, Direct to Garment, DTF, Dye, Dye Sublimation, Eco-Solvent, Edible, Hard Solvent, Latex, Low Solvent, Mild Solvent, Pigment, UV, UV Curable |
|---|---|
| Printer Brand | Agfa, Brother, Canon, Epson, Fuji, Homer, HP, Kiaro, Kornit, Kyosera, Mimaki, Mutoh, Noritsu, NUR, Oce, Oki, Ricoh, Roland, Seiko, STS, Vutek |
| Printer Model | Jeti Titan 3020, Jeti Titan HS, Jeti Titan S |
| Printer Series | Jeti Mira Series, Jeti Tauro Series, Jeti Titen Series |
This Sub Tank Assy is suitable for Mutoh Valuejet 1608 Hybrid printers.
SKU: DG-45834
Manufacturer part number: DG-45834
Manufacturer: Mutoh
Manifold that is compatible with Epson DX4 printheads and resists solvents.
SKU: PADEP10MAS
Manufacturers: DIGIPRINT , Epson
Mutoh Osprey 102 printers can use this generic Steel Belt (26) Assy. A high-quality generic part that is comparable to the Mutoh part (number DF-47848) The length and width of this Steel Belt (26) Assy are 2.5 centimeters. Due to its discontinuation, this belt is no longer available from Mutoh.
SKU: PMEMUOS6016O
Manufacturer part number: DF-47848
Manufacturer: Mutoh
This ADAPTER,JUNCTION 3T is a genuine Roland component that is compatible with a particular line of Roland printers.
SKU: 1000017902
Manufacturer part number: 1000017902
Manufacturer: Roland
This belt MXL B-220 6.4 is suitable for DGI Spacejet printers.
SKU: 007977
Manufacturer: DGI
A wide range of Epson I3200/I1600 printhead-based DTF printers can use this generic capping unit.
SKU: PCAEP87856
Manufacturer part number: PCAEP87856
Manufacturers: DIGIPRINT , Epson
This Assy, Pinch Org Board is suitable for Roland AJ-1000 printers. This is the original Roland part (number W700105720).
Printer compatibility
Roland AJ-1000
Roland AJ-1000i
Roland AJ-740
Roland AJ-740i
Product specifications
Mutoh Valuejet 1604 printers can use this generic bearing.
SKU: PMEMUVJ002O
Manufacturer part number: KY-14620
Manufacturers: DIGIPRINT , Mutoh
Roland XJ-640 printers can use this generic belt.
SKU: PBEROXJ6001O
Manufacturer part number: 1000003688
Manufacturers: DIGIPRINT , Roland
Various Roland and Mimaki printers are compatible with this bearing block, QEH15SA.
SKU: QEH15SA
Manufacturer part number: QEH15SA
Manufacturers: Roland , Mimaki
Mutoh Valuejet 1604 printers are compatible with this CR speed reduction belt. The original Mutoh component (DF-43940) can be found here. The circumference of this 10-millimeter-wide CR speed reduction belt is 240 millimeters.
SKU: PBEMUVJ6002
Manufacturer part number: DF-43940
Manufacturer: Mutoh
Summa SummaSign cutters are compatible with this BELT Y-MOTOR 150T.
SKU: 004612
Manufacturer part number: MB0380
Manufacturer: Summa
Select at least 2 products
to compare
Reviews
There are no reviews yet.