This Block MES20 is suitable for Mimaki JF-1610 & JF-1631 series printers. This part includes the block only (without the rail) that corresponds to part number MES20C2R3700 & MES20C2R1480. This is the full block with ball bearings mounted in.
| Ink Type | Aqueous, Direct to Garment, DTF, Dye, Dye Sublimation, Eco-Solvent, Edible, Hard Solvent, Latex, Low Solvent, Mild Solvent, Pigment, UV, UV Curable |
|---|---|
| Printer Brand | Agfa, Brother, Canon, Epson, Fuji, Homer, HP, Kiaro, Kornit, Kyosera, Mimaki, Mutoh, Noritsu, NUR, Oce, Oki, Ricoh, Roland, Seiko, STS, Vutek |
| Printer Model | Jeti Titan 3020, Jeti Titan HS, Jeti Titan S |
| Printer Series | Jeti Mira Series, Jeti Tauro Series, Jeti Titen Series |
VUTEk UltraVu II 5330 printers are compatible with this Coupler.25-.25 Flex. This is the original P7816-A VUTEk component. The width of this Coupler.25-.25 Flex is 25.5 mm. It has an inner diameter of 6.33mm and an outer diameter of 25.30mm.
SKU: P7816-A
Manufacturer part number: P7816-A
Manufacturer: EFI
EFI VUTEk GS5000r printers are compatible with this timing belt.
SKU: 45085360
Manufacturer part number: 45085360
Manufacturer: EFI
This Vacuum Purge Trap Assembly is suitable for VUTEk QS & GS Series printers.
SKU: AA90647
Manufacturer part number: AA90647
Manufacturer: EFI
Solvent resistant manifold suitable for Epson DX3 printheads. You can convert a water-based FJ-500/FJ-600 printhead into a solvent-resistant component by replacing this manifold.
SKU: PADEPDX301
Manufacturer part number: 84439910
Manufacturers: DIGIPRINT , Roland
The manufacturer has discontinued this product. Please scroll down for more information below.
SKU: 1000002698
Manufacturer part number: 1000002698
Manufacturer: Roland
This LM guide is suitable for Roland SP-300i printers. This part includes the rail only (without the blocks) that corresponds to part number 1000002196. 1440mm in length is this LM Guide.
SKU: 414SR15-2740LY
Manufacturer part number: 1000002196
Manufacturer: Roland
Printers in the CJV300, CJV150, JV150, and JV300 series can use this timing belt.
SKU: 10379
Manufacturer part number: 100S2M210
Manufacturer: Mimaki
Mimaki JV3, JV33, and JV5 series printers can use this generic speed reduction belt.
SKU: S2M-380-15MM
Manufacturer part number: 150 S2M 380G
Manufacturers: Mimaki , DIGIPRINT
Mimaki JV5, JV33, and UJF-3042 printers are compatible with this generic bearing.
SKU: PMEMI18835
Manufacturer part number: F699ZZ
Manufacturers: Mimaki , DIGIPRINT
Specific printers can use this carriage drive timing belt.
SKU: 88S3M312
Manufacturer: DIGIPRINT
Summa SummaSign cutters are compatible with this BELT Y-MOTOR 150T.
SKU: 004612
Manufacturer part number: MB0380
Manufacturer: Summa
This KIT FLATCABLES S75T is suitable for Summa S Class 75 cutters. This is the original Summa part (number 395-403).
Printer compatibility
Summa S-Class-75-T-Series
Select at least 2 products
to compare
Reviews
There are no reviews yet.