This Block MES20 is suitable for Mimaki JF-1610 & JF-1631 series printers. This part includes the block only (without the rail) that corresponds to part number MES20C2R3700 & MES20C2R1480. This is the full block with ball bearings mounted in.
| Ink Type | Aqueous, Direct to Garment, DTF, Dye, Dye Sublimation, Eco-Solvent, Edible, Hard Solvent, Latex, Low Solvent, Mild Solvent, Pigment, UV, UV Curable |
|---|---|
| Printer Brand | Agfa, Brother, Canon, Epson, Fuji, Homer, HP, Kiaro, Kornit, Kyosera, Mimaki, Mutoh, Noritsu, NUR, Oce, Oki, Ricoh, Roland, Seiko, STS, Vutek |
| Printer Model | Jeti Titan 3020, Jeti Titan HS, Jeti Titan S |
| Printer Series | Jeti Mira Series, Jeti Tauro Series, Jeti Titen Series |
Roland printers are compatible with this BELT,50S2M575LW-C. The original Roland part (number 1000014691) is here.
SKU: 1000014691
Manufacturer part number: 1000014691
Manufacturer: Roland
The AGFA:Anapurna M printers can use this SR19 coupling. It is used in the print head lifting mechanism. This is the original Agfa component (number D2+7350101-0001 has been substituted for D2+2102083). This SR19 coupling has an inner diameter of 5.98mm and an outer diameter of 19.11mm.
SKU: SRB-19-6-5
Manufacturer part number: D2+7350101-0001
Manufacturer: Agfa
Mutoh VJ-1204 printers can use this cap head assembly.
SKU: DG-41179
Manufacturer part number: DG-41179
Manufacturer: Mutoh
The manufacturer has discontinued this product. Please scroll down for more information below.
SKU: 21925137
Manufacturer part number: 21925137
Manufacturer: Roland
JF-1631 printers can use this coupling. This is the original Mimaki part (number MCO17-5-5).
SKU: MCO17-5-5
Manufacturer part number: MCO17-5-5
Manufacturer: Mimaki
This Ink ID Board Assy (Smart Chip reader) is suitable for Mutoh RJ-8000 (Falcon II) printers.
SKU: DF-43968
Manufacturer part number: DF-43968
Manufacturer: Mutoh
Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
This KIT FLATCABLES S75T is suitable for Summa S Class 75 cutters. This is the original Summa part (number 395-403).
Printer compatibility
Summa S-Class-75-T-Series
Mutoh Valuejet 1604 printers are compatible with this steel belt.
SKU: DF-43937
Manufacturer part number: DF-43937
Manufacturer: Mutoh
Summa SummaSign cutters are compatible with this BELT Y-MOTOR 150T.
SKU: 004612
Manufacturer part number: MB0380
Manufacturer: Summa
Roland CJ-540 printers are compatible with this generic belt, 408P2M4-530.
SKU: 008055
Manufacturer part number: 11929138
Manufacturers: Roland , DIGIPRINT
Various Roland and Mimaki printers are compatible with this bearing block, QEH15CA.
SKU: QEH15CA
Manufacturer part number: QEH15CA
Manufacturers: Roland , Mimaki
Select at least 2 products
to compare
Reviews
There are no reviews yet.