This Block MES20 is suitable for Mimaki JF-1610 & JF-1631 series printers. This part includes the block only (without the rail) that corresponds to part number MES20C2R3700 & MES20C2R1480. This is the full block with ball bearings mounted in.
| Ink Type | Aqueous, Direct to Garment, DTF, Dye, Dye Sublimation, Eco-Solvent, Edible, Hard Solvent, Latex, Low Solvent, Mild Solvent, Pigment, UV, UV Curable |
|---|---|
| Printer Brand | Agfa, Brother, Canon, Epson, Fuji, Homer, HP, Kiaro, Kornit, Kyosera, Mimaki, Mutoh, Noritsu, NUR, Oce, Oki, Ricoh, Roland, Seiko, STS, Vutek |
| Printer Model | Jeti Titan 3020, Jeti Titan HS, Jeti Titan S |
| Printer Series | Jeti Mira Series, Jeti Tauro Series, Jeti Titen Series |
This Male Luer with Rotating Lock Ring in yellow natural polypropylene is suitable for the Durst Rho printers.
SKU: ABSML-6005-07
Manufacturer part number: 1342800
Manufacturer: Durst
This End Cap (Male) is an original Mutoh part, suitable for a specific range of Mutoh printers.
SKU: DG-48839
Manufacturer part number: DG-48839
Manufacturer: Mutoh
This set of 20 solvent resistant white polypropylene luer female fitting is suitable for all wide format inkjet printers printers.
SKU: FTLL035-6005/20
Manufacturer: DIGIPRINT
Roland SJ-1000 printers are compatible with this Belt,150S2M3653LW-C.
SKU: PBEROSJ6021
Manufacturer part number: 21925148
Manufacturer: Roland
The Roland RS-540 printers are compatible with this Adapter, Joint 2-3FAI.
SKU: 1000004796
Manufacturer part number: 1000004796
Manufacturer: Roland
The manufacturer has discontinued this product. Please scroll down for more information below.
SKU: 13439201
Manufacturer part number: 13439201
Manufacturer: Roland
This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
This product has been discontinued by the manufacturer. Please continue reading for additional details.
SKU: M800982
Manufacturer part number: M800982
Manufacturer: Mimaki
Mimaki JV3, JV33, and JV5 series printers can use this generic speed reduction belt.
SKU: S2M-380-15MM
Manufacturer part number: 150 S2M 380G
Manufacturers: Mimaki , DIGIPRINT
Printers in the CJV300, CJV150, JV150, and JV300 series can use this timing belt.
SKU: 10379
Manufacturer part number: 100S2M210
Manufacturer: Mimaki
Various Roland and Mimaki printers are compatible with this bearing block, QEH15SA.
SKU: QEH15SA
Manufacturer part number: QEH15SA
Manufacturers: Roland , Mimaki
Mutoh Valuejet 1604 printers can use this generic bearing.
SKU: PMEMUVJ002O
Manufacturer part number: KY-14620
Manufacturers: DIGIPRINT , Mutoh
Select at least 2 products
to compare
Reviews
There are no reviews yet.