This Block MES20 is suitable for Mimaki JF-1610 & JF-1631 series printers. This part includes the block only (without the rail) that corresponds to part number MES20C2R3700 & MES20C2R1480. This is the full block with ball bearings mounted in.
| Ink Type | Aqueous, Direct to Garment, DTF, Dye, Dye Sublimation, Eco-Solvent, Edible, Hard Solvent, Latex, Low Solvent, Mild Solvent, Pigment, UV, UV Curable |
|---|---|
| Printer Brand | Agfa, Brother, Canon, Epson, Fuji, Homer, HP, Kiaro, Kornit, Kyosera, Mimaki, Mutoh, Noritsu, NUR, Oce, Oki, Ricoh, Roland, Seiko, STS, Vutek |
| Printer Model | Jeti Titan 3020, Jeti Titan HS, Jeti Titan S |
| Printer Series | Jeti Mira Series, Jeti Tauro Series, Jeti Titen Series |
This Carriage Belt VC-600 is an original Mutoh part, suitable for a specific range of Mutoh printers.
SKU: ME-G20600054G
Manufacturer part number: ME-G20600054G
Manufacturer: Mutoh
This BELT,PSA-13CEBR/F10*309 is suitable for Roland printers.
SKU: 1000002084
Manufacturer part number: 1000002084
Manufacturer: Roland
Marabu Clearshield® Classic is a water-based liquid coating with a low viscosity that provides enhanced UV protection as well as chemical and abrasion resistance. can be applied with a brush, roller, or automated spray equipment or by hand. If you’re looking for a laminate with a lower viscosity, Classic Lite is an option that provides the same excellent protection as ClearShield Classic.
SKU: 360297811
Manufacturer part number: 360297811
Manufacturer: Marabu
This ASSY Y-BELT is suitable for Summa DC4 printers. This is the original Summa part (partnumber 420-520).
SKU: 420-520
Manufacturer part number: 420-520
Manufacturer: Summa
This Belt-Drive Carriage is suitable for Océ Arizona 550 GT / XT printers.
SKU: 3W3010108440
Manufacturer part number: 3010108440
Manufacturer: Canon Océ
Summa SummaSign cutters are compatible with this BELT Y-MOTOR 150T.
SKU: 004612
Manufacturer part number: MB0380
Manufacturer: Summa
This KIT FLATCABLES S75T is suitable for Summa S Class 75 cutters. This is the original Summa part (number 395-403).
Printer compatibility
Summa S-Class-75-T-Series
For some Roland printers, this generic bearing block, SSR15XW1UUE, is suitable.
SKU: PMERO17713
Manufacturer part number: 21895154
Manufacturers: Roland , DIGIPRINT
This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
Summa SummaSign cutters are compatible with this BELT X-MOTOR 110T, W=0.25.
SKU: 007828
Manufacturer part number: MB9124
Manufacturer: Summa
Printers in the CJV300, CJV150, JV150, and JV300 series can use this timing belt.
SKU: 10379
Manufacturer part number: 100S2M210
Manufacturer: Mimaki
Select at least 2 products
to compare
Reviews
There are no reviews yet.