This Block MES20 is suitable for Mimaki JF-1610 & JF-1631 series printers. This part includes the block only (without the rail) that corresponds to part number MES20C2R3700 & MES20C2R1480. This is the full block with ball bearings mounted in.
| Ink Type | Aqueous, Direct to Garment, DTF, Dye, Dye Sublimation, Eco-Solvent, Edible, Hard Solvent, Latex, Low Solvent, Mild Solvent, Pigment, UV, UV Curable |
|---|---|
| Printer Brand | Agfa, Brother, Canon, Epson, Fuji, Homer, HP, Kiaro, Kornit, Kyosera, Mimaki, Mutoh, Noritsu, NUR, Oce, Oki, Ricoh, Roland, Seiko, STS, Vutek |
| Printer Model | Jeti Titan 3020, Jeti Titan HS, Jeti Titan S |
| Printer Series | Jeti Mira Series, Jeti Tauro Series, Jeti Titen Series |
This ADAPTER,JOINT 3L is an original Roland part, suitable for a specific range of Roland printers.
SKU: 1000017901
Manufacturer part number: 1000017901
Manufacturer: Roland
This Belt-Drive Carriage is suitable for Océ Arizona 550 GT / XT printers.
SKU: 3W3010108440
Manufacturer part number: 3010108440
Manufacturer: Canon Océ
Seiko Colorpainter H-74s printers are compatible with this Capping Station (HV).
SKU: U00112509000
Manufacturer part number: U00112509000
Manufacturer: Oki
This LM guide is suitable for Roland VS-640 printers. The rail alone, without the blocks, is included in this item, which is part number 1000006512. This LM Guide is 2320mm long.
SKU: 414SR15-1440L
Manufacturer part number: 1000006512
Manufacturer: Roland
This product has been discontinued by the manufacturer. Please continue reading for additional details.
SKU: 11929150
Manufacturer part number: 11929150
Manufacturer: Roland
This Jetrix 3015 Bearing Block – HSR20 is suitable for Inktec printers.
SKU: 414HSR20RSS
Manufacturer part number: HSR20
Manufacturer: Inktec
Mimaki JV3, JV33, and JV5 series printers can use this generic speed reduction belt.
SKU: S2M-380-15MM
Manufacturer part number: 150 S2M 380G
Manufacturers: Mimaki , DIGIPRINT
Roland XJ-640 printers can use this generic belt.
SKU: PBEROXJ6001O
Manufacturer part number: 1000003688
Manufacturers: DIGIPRINT , Roland
This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
Mutoh Valuejet 1604 printers are compatible with this CR speed reduction belt. The original Mutoh component (DF-43940) can be found here. The circumference of this 10-millimeter-wide CR speed reduction belt is 240 millimeters.
SKU: PBEMUVJ6002
Manufacturer part number: DF-43940
Manufacturer: Mutoh
Mimaki JV3, JV33, and JV5 series printers are compatible with this generic speed reduction belt.
SKU: PBEMIJV305O
Manufacturer part number: 150 S2M 380G
Manufacturer: DIGIPRINT
Specific printers can use this carriage drive timing belt.
SKU: 88S3M312
Manufacturer: DIGIPRINT
Select at least 2 products
to compare
Reviews
There are no reviews yet.