This Block MES20 is suitable for Mimaki JF-1610 & JF-1631 series printers. This part includes the block only (without the rail) that corresponds to part number MES20C2R3700 & MES20C2R1480. This is the full block with ball bearings mounted in.
| Ink Type | Aqueous, Direct to Garment, DTF, Dye, Dye Sublimation, Eco-Solvent, Edible, Hard Solvent, Latex, Low Solvent, Mild Solvent, Pigment, UV, UV Curable |
|---|---|
| Printer Brand | Agfa, Brother, Canon, Epson, Fuji, Homer, HP, Kiaro, Kornit, Kyosera, Mimaki, Mutoh, Noritsu, NUR, Oce, Oki, Ricoh, Roland, Seiko, STS, Vutek |
| Printer Model | Jeti Titan 3020, Jeti Titan HS, Jeti Titan S |
| Printer Series | Jeti Mira Series, Jeti Tauro Series, Jeti Titen Series |
This product has been discontinued by the manufacturer. Please continue reading for additional details.
SKU: 6702029010
Manufacturer part number: 6702029010
Manufacturer: Roland
Mimaki printers in the JV5, JV33, and CJV30 series can use this joint Valve Assy.
SKU: M006954
Manufacturer part number: M006954
Manufacturer: Mimaki
Epson Stylus Pro 4800/4880 printers that use ecosolvent inks are compatible with this high-quality capping.
SKU: PCAEP4802
Manufacturers: DIGIPRINT , Epson
This Bearing (6005) is an original Mutoh part, suitable for a specific range of Mutoh printers.
SKU: DG-48828
Manufacturer part number: DG-48828
Manufacturer: Mutoh
This Belt Flat M 50.8x 0.127 x 78242 301 is suitable for Océ Arizona 440 GT / XT printers. The original Océ component (number 3010112872) is here. This steel belt has a total length of 8260mm and is 50mm wide.
SKU: 3W3010112872
Manufacturer part number: 3010112872
Manufacturer: Canon Océ
Mimaki JV3, JV33, and JV5 series printers are compatible with this generic speed reduction belt.
SKU: PBEMIJV305O
Manufacturer part number: 150 S2M 380G
Manufacturer: DIGIPRINT
This Assy, Pinch Org Board is suitable for Roland AJ-1000 printers. This is the original Roland part (number W700105720).
Printer compatibility
Roland AJ-1000
Roland AJ-1000i
Roland AJ-740
Roland AJ-740i
Product specifications
Mutoh VJ-1608HS printers can use this generic CR Deceleration Belt Assy.
SKU: 011011
Manufacturer part number: DG-42458
Manufacturers: DIGIPRINT , Mutoh
This KIT FLATCABLES S120T is suitable for Summa S Class 12 cutters. This is the original Summa part (replacing part number 395-405).
Printer compatibility
Summa S-Class-120-T-Series
Printers in the CJV300, CJV150, JV150, and JV300 series can use this timing belt.
SKU: 10379
Manufacturer part number: 100S2M210
Manufacturer: Mimaki
This KIT FLATCABLES S75T is suitable for Summa S Class 75 cutters. This is the original Summa part (number 395-403).
Printer compatibility
Summa S-Class-75-T-Series
Select at least 2 products
to compare
Reviews
There are no reviews yet.