This Block MES20 is suitable for Mimaki JF-1610 & JF-1631 series printers. This part includes the block only (without the rail) that corresponds to part number MES20C2R3700 & MES20C2R1480. This is the full block with ball bearings mounted in.
| Ink Type | Aqueous, Direct to Garment, DTF, Dye, Dye Sublimation, Eco-Solvent, Edible, Hard Solvent, Latex, Low Solvent, Mild Solvent, Pigment, UV, UV Curable |
|---|---|
| Printer Brand | Agfa, Brother, Canon, Epson, Fuji, Homer, HP, Kiaro, Kornit, Kyosera, Mimaki, Mutoh, Noritsu, NUR, Oce, Oki, Ricoh, Roland, Seiko, STS, Vutek |
| Printer Model | Jeti Titan 3020, Jeti Titan HS, Jeti Titan S |
| Printer Series | Jeti Mira Series, Jeti Tauro Series, Jeti Titen Series |
Mutoh Valuejet 426UF printers are compatible with this I/C Holder Assy 3 (Fitting). The original Mutoh component (number DG-45276) is here.
SKU: DG-45276
Manufacturer part number: DG-45276
Manufacturer: Mutoh
Océ Arizona 360 GT and 360 XT printers are compatible with this NS4 Female coupling.
SKU: NS4D17002
Manufacturer part number: 3010109812
Manufacturer: Canon Océ
Epson printers can use this Stylus Pro R1900 Ink Capping Station – 1617579.
SKU: PCADI83133
Manufacturer part number: 1617579
Manufacturers: DIGIPRINT , Epson
This product has been discontinued by the manufacturer. Please scroll down for more information below.
SKU: 1000008694
Manufacturer part number: 1000008694
Manufacturer: Roland
The manufacturer has discontinued this product. Please scroll down for more information below.
SKU: 21905156
Manufacturer part number: 21905156
Manufacturer: Roland
Open-ended S3M rubber belt
SKU: S3M
Manufacturer part number: OPENRUBS3M15mm
Manufacturer: DIGIPRINT
Various Roland and Mimaki printers are compatible with this bearing block, QEH15CA.
SKU: QEH15CA
Manufacturer part number: QEH15CA
Manufacturers: Roland , Mimaki
Roland CJ-540 printers are compatible with this generic belt, 408P2M4-530.
SKU: 008055
Manufacturer part number: 11929138
Manufacturers: Roland , DIGIPRINT
Several Roland printers are compatible with this bearing block, SSR15XW1GGE (see compatibility list below).
SKU: SSR 15 X W SS G
Manufacturer part number: 1000002145
Manufacturer: Roland
This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
Mutoh Valuejet 1604 printers are compatible with this CR speed reduction belt. The original Mutoh component (DF-43940) can be found here. The circumference of this 10-millimeter-wide CR speed reduction belt is 240 millimeters.
SKU: PBEMUVJ6002
Manufacturer part number: DF-43940
Manufacturer: Mutoh
Specific printers can use this carriage drive timing belt.
SKU: 88S3M312
Manufacturer: DIGIPRINT
Select at least 2 products
to compare
Reviews
There are no reviews yet.