This Block MES20 is suitable for Mimaki JF-1610 & JF-1631 series printers. This part includes the block only (without the rail) that corresponds to part number MES20C2R3700 & MES20C2R1480. This is the full block with ball bearings mounted in.
| Ink Type | Aqueous, Direct to Garment, DTF, Dye, Dye Sublimation, Eco-Solvent, Edible, Hard Solvent, Latex, Low Solvent, Mild Solvent, Pigment, UV, UV Curable |
|---|---|
| Printer Brand | Agfa, Brother, Canon, Epson, Fuji, Homer, HP, Kiaro, Kornit, Kyosera, Mimaki, Mutoh, Noritsu, NUR, Oce, Oki, Ricoh, Roland, Seiko, STS, Vutek |
| Printer Model | Jeti Titan 3020, Jeti Titan HS, Jeti Titan S |
| Printer Series | Jeti Mira Series, Jeti Tauro Series, Jeti Titen Series |
Mutoh RJ-8000 (Falcon II) printers are compatible with this X Speed Reduction Belt. The original Mutoh component (DF-42846) can be found here.
SKU: 19163
Manufacturer part number: DF-42846
Manufacturer: Mutoh
The Summa D75 printers are compatible with this kit.
SKU: KIT-1009
Manufacturer part number: KIT-1009
Manufacturer: Summa
Mimaki UJF-3042 printers can use this generic Cap Assy.
SKU: PCAMI14085O
Manufacturer part number: M012112
Manufacturers: DIGIPRINT , Mimaki
Marabu Clearshield® Classic is a high-viscosity water-based liquid coating for enhanced UV-protection, chemical and abrasion resistance. For use on most non-water sensitive materials. can be applied by hand using a brush or roller. Of all the formulations, ClearShield Classic has the highest film build. It works well for banners, vinyl, and vertical applications.
SKU: 360299911
Manufacturer part number: 360299911
Manufacturer: Marabu
This original Mutoh part in the shape of an L is compatible with a specific line of Mutoh printers.
SKU: DH-40873
Manufacturer part number: DH-40873
Manufacturer: Mutoh
This product has been discontinued by the manufacturer. Please scroll down for more information below.
SKU: 22605115
Manufacturer part number: 22605115
Manufacturer: Roland
Mutoh VJ-1608HS printers can use this generic CR Deceleration Belt Assy.
SKU: 011011
Manufacturer part number: DG-42458
Manufacturers: DIGIPRINT , Mutoh
Summa SummaSign cutters are compatible with this BELT X-MOTOR 110T, W=0.25.
SKU: 007828
Manufacturer part number: MB9124
Manufacturer: Summa
Mutoh Valuejet 1604 printers are compatible with this steel belt.
SKU: DF-43937
Manufacturer part number: DF-43937
Manufacturer: Mutoh
Mimaki JV3, JV33, and JV5 series printers can use this generic speed reduction belt.
SKU: S2M-380-15MM
Manufacturer part number: 150 S2M 380G
Manufacturers: Mimaki , DIGIPRINT
This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
Summa SummaSign cutters are compatible with this BELT Y-MOTOR 150T.
SKU: 004612
Manufacturer part number: MB0380
Manufacturer: Summa
Select at least 2 products
to compare
Reviews
There are no reviews yet.