Description
Mimaki JV3, JV33, and JV5 series printers are compatible with this generic speed reduction belt. On the JV3 printer, it is a short belt that runs between the Y motor and the Y pulley. This belt has a width of 1.5 cm and a circumference of 38 cm.
SC-545ex Fitting Tube PP VFY206 (100 pcs) – 1000002095
$292.52Roland SC, SJ, VP, and SP printers are compatible with this set of 100 fitting tubes (PP VFY206).
SKU: Y220-6005
Manufacturer part number: 1000002095
Manufacturer: Roland
AJ-1000 Belt, 340P2M4-530 – 1000000785
$41.57This generic belt, 340P2M4-530 is suitable for Roland AJ-1000 printers.
SKU: 008054
Manufacturer part number: 1000000785
Manufacturers: Roland , DIGIPRINT
Straight Through Reduction Tube Fitting ID Tubing 3.2mm to 2.4mm Nylon white (20 pcs)
$87.67All wide format inkjet printers are compatible with this set of twenty straight through tube fittings made of white, solvent-resistant nylon.
SKU: DC-1/20
Manufacturer: DIGIPRINT
Mimaki / Roland / Mutoh Solvent Resistant Y Connector (ID: 3mm, OD: 4mm)
$15.08Three tubes with an ID of 3 mm and an OD of 4 mm can be connected with this solvent-resistant Y connector.
SKU: PCNDI8749
Manufacturers: DIGIPRINT , Mutoh , Roland , Mimaki
Marabu ClearJet Original Type A2000, Semi-Gloss – 12 oz Spray Can
$45.15Protecting your prints, fine art, signs, banners, photographic output, awnings, and other products from UV rays, abrasion, and marring is simple and affordable with Marabu ClearJet®.
SKU: 360363002
Manufacturer part number: 360363002
Manufacturer: Marabu
VJ-1938 Steel Belt 74 Assy – DG-45268
$174.94Mutoh printers can use his VJ-1938 Steel Belt 74 Assy – DG-45268.
SKU: PBEMU83116O
Manufacturer part number: DG-45268
Manufacturers: DIGIPRINT , Mutoh
Related Products
REX-62 Connector 30P Cable – ECARC02-0005
$51.47This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
S Class 75 KIT FLATCABLES S75T – 395-403
$240.67This KIT FLATCABLES S75T is suitable for Summa S Class 75 cutters. This is the original Summa part (number 395-403).
Printer compatibility
Summa S-Class-75-T-Series
VJ-1608HS CR Deceleration Belt Assy – DG-42458
$52.86Mutoh VJ-1608HS printers can use this generic CR Deceleration Belt Assy.
SKU: 011011
Manufacturer part number: DG-42458
Manufacturers: DIGIPRINT , Mutoh
VP-540 L-Bearing, SSR15XW1GGE (Block only)
$302.13Several Roland printers are compatible with this bearing block, SSR15XW1GGE (see compatibility list below).
SKU: SSR 15 X W SS G
Manufacturer part number: 1000002145
Manufacturer: Roland
JV3 Y Timing Belt – 150 S2M 380G
$11.39Mimaki JV3, JV33, and JV5 series printers are compatible with this generic speed reduction belt.
SKU: PBEMIJV305O
Manufacturer part number: 150 S2M 380G
Manufacturer: DIGIPRINT
VJ-1604 Bearing – KY-14620
$4.57Mutoh Valuejet 1604 printers can use this generic bearing.
SKU: PMEMUVJ002O
Manufacturer part number: KY-14620
Manufacturers: DIGIPRINT , Mutoh
Reviews
There are no reviews yet.