Description
Mimaki JV33 printers can use this box of ten generic cap pads. These generic cap pads are of high quality and can be used with the original Mimaki capping station. The Mimaki part number for these generic cap pads is M800974 / SPA-0161.
SummaCut BELT Y-MOTOR 140T, W=0.25 – MB9129
$28.83For SummaCut cutters, this BELT Y-MOTOR 140T, W=0.25 is suitable.
SKU: 007987
Manufacturer part number: MB9129
Manufacturer: Summa
FTG-PUSH ELBOW 1/4OD X 1/8NPT – 3010104463
$26.66Océ Arizona 550XT is compatible with this Fitting Push.
SKU: 3010104463
Manufacturer part number: 3010104463
Manufacturer: Canon Océ
Epson XP600 / TX800 capping unit
$42.02This generic capping unit is compatible with a wide range of DTF printers based on printheads made by Epson XP600/TX800.
SKU: PCAEPXP601
Manufacturers: Epson , DIGIPRINT
Jeti Jason Toothed Timing Belt – 615-424800
$121.79This original Jason toothed timing belt is suitable for Agfa Gandinnovations Jeti 5000 and 5024 Solvent printers. The belt has a circumference of 424 millimeters and a width of 20 millimeters and can withstand temperatures of -20 to 100 degrees Celsius. This is the original Agfa / Gandinnovations part (number 615-424800).
SKU: HTD 424-8M
Manufacturer part number: 615-424800
Manufacturer: Agfa
JV400-SUV Cap Assy – M016106
Printers in the Mimaki JV400 series are compatible with this Cap Assy. This is the original Mimaki part, replacing M015210 with M016106.
SKU: M016106
Manufacturer part number: M016106
Manufacturer: Mimaki
Arizona 6100 FTG Push 1/4 OD 5/32 ID TEE – 3W3010105241
$19.73Océ Arizona 6100 and Fujifilm Acuity F series printers work with this Fitting Push Tee. The original Océ component (number 3010105241) is here. The inner diameter of this fitting is 4mm (5/35″), while the outer diameter is 6.4mm (1/4″).
SKU: 3W3010105241
Manufacturer part number: 3010105241
Manufacturer: Canon Océ
Related Products
VJ-1604 Steel Belt – DF-43937
$156.19Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
XJ-640 Belt,150S2M2754LW-C – 1000003688
$644.02Roland XJ-640 printers can use this generic belt.
SKU: PBEROXJ6001O
Manufacturer part number: 1000003688
Manufacturers: DIGIPRINT , Roland
Summa S Class Kit S(2) 120 Flat Cable – KIT-2030
$416.04This KIT FLATCABLES S120T is suitable for Summa S Class 12 cutters. This is the original Summa part (replacing part number 395-405).
Printer compatibility
Summa S-Class-120-T-Series
AJ-1000 Assy, Main Board – 1000000559
$3,431.37This Assy, Main Board is suitable for Roland AJ-1000 printers. This is the original Roland part (number 1000000559). Printer compatibility Roland AJ-1000 Roland AJ-1000i Roland AJ-740 Roland AJ-740i Product specifications Type Main Boards
CG1107 Assy, Main Board – 6000003126
$1,845.96This Assy, Main Board is suitable for Roland printers. This is the original Roland part (number 6000003126). Printer compatibility Roland GR-540 Roland GR-640 Roland GR-420 Product specifications Type Main Boards
SJ-740 L-Bearing SSR15XW1UUE – 21895153 (Block only)
$306.56For some Roland printers, this generic bearing block, SSR15XW1UUE, is suitable.
SKU: PMERO17713
Manufacturer part number: 21895154
Manufacturers: Roland , DIGIPRINT
Reviews
There are no reviews yet.