Description
This LM guide (2 blocks) is suitable for Mimaki JV5-320S & JV5-320DS printers. This is the original Mimaki part (number SSR15XW2GC1F+4680LYTF). This LM guide is 4680mm long.
More Products
GS Series Fitting Luer 3/32 Female (20 pcs) – P2122-A
$83.40This set of 20 Fitting Luer 3/32 Female is suitable for VUTEk GS-Series printers.
SKU: FTL220-1/20
Manufacturer part number: P2122-A
Manufacturer: EFI
BELT,2GT-T120-W10 – 1000025013
$118.32The manufacturer has discontinued this product. Please scroll down for more information below.
SKU: 1000025013
Manufacturer part number: 1000025013
Manufacturer: Roland
Mimaki / Mutoh / Roland Solvent Resistant Connector (ID: 2mm, OD: 3mm)
$15.08This solvent-resistant connector helps join two tubes with an ID of 2 mm and an OD of 3 mm.
SKU: PCNDI8743
Manufacturers: DIGIPRINT , Mutoh , Roland , Mimaki
XJ-740 Carton, Spacer – 1000003564
$82.10This product has been discontinued by the manufacturer. Please scroll down for more information below.
SKU: 1000003564
Manufacturer part number: 1000003564
Manufacturer: Roland
Arizona 6100 Coupling Flex Bellows – 3W3010108724
$913.27This Coupling Flex Bellows is suitable for Océ Arizona 6100 and Fujifilm Acuity F series printers. The original Océ part (number 3010108724) is presented here.
SKU: 3W3010108724
Manufacturer part number: 3010108724
Manufacturer: Canon Océ
GS Series Fitting Luer 3/32 Male (100 pcs) – P2121-A
$291.80This set of 100 Fitting Luer -> 3/32 Male is suitable for VUTEk GS-Series printers.
SKU: MTLL007-6005
Manufacturer part number: P2121-A
Manufacturer: EFI
Related Products
VJ-1604 Steel Belt – DF-43937
$156.19Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
QEH15SA L-Bearing (Block only)
$168.63Various Roland and Mimaki printers are compatible with this bearing block, QEH15SA.
SKU: QEH15SA
Manufacturer part number: QEH15SA
Manufacturers: Roland , Mimaki
JV33 Y Drive Belt – M800982
$163.41Mimaki JV33 printers are compatible with this generic Y drive belt, which is also known as a carriage belt.
SKU: PBEMIJV3301S
Manufacturer part number: M800982
Manufacturers: Mimaki , DIGIPRINT
CJV300 Timing Belt – 100S2M210
$28.83Printers in the CJV300, CJV150, JV150, and JV300 series can use this timing belt.
SKU: 10379
Manufacturer part number: 100S2M210
Manufacturer: Mimaki
VJ-1604 Bearing – KY-14620
$4.57Mutoh Valuejet 1604 printers can use this generic bearing.
SKU: PMEMUVJ002O
Manufacturer part number: KY-14620
Manufacturers: DIGIPRINT , Mutoh
Carriage Drive Timing Belt
$182.62Specific printers can use this carriage drive timing belt.
SKU: 88S3M312
Manufacturer: DIGIPRINT
Reviews
There are no reviews yet.