Description
This Bearing holder V320 is suitable for Mimaki JV5-320S & JV5-260S printers. This is the original Mimaki part (number M205571).
Additional information
Additional information
| Ink Type | Aqueous, Direct to Garment, DTF, Dye, Dye Sublimation, Eco-Solvent, Edible, Hard Solvent, Latex, Low Solvent, Mild Solvent, Pigment, UV, UV Curable |
|---|---|
| Printer Brand | Agfa, Brother, Canon, Epson, Fuji, Homer, HP, Kiaro, Kornit, Kyosera, Mimaki, Mutoh, Noritsu, NUR, Oce, Oki, Ricoh, Roland, Seiko, STS, Vutek |
| Printer Model | Jeti Titan 3020, Jeti Titan HS, Jeti Titan S |
| Printer Series | Jeti Mira Series, Jeti Tauro Series, Jeti Titen Series |
More Products
R-BEARING,D10S6(B3FL) – 11889107
$48.07This R-BEARING,D10S6(B3FL) is an original Roland part, suitable for a specific range of Roland printers.
SKU: 11889107
Manufacturer part number: 11889107
Manufacturer: Roland
Jetrix 2513FRQ Bearing – SG20-2RS
$17.92The Inktec Jetrix 2513FRQ printers can use this generic bearing.
SKU: PMEIN19751
Manufacturer part number: SG20-2RS
Manufacturers: Inktec , DIGIPRINT
Toucan Steel Belt, 87 Assy – DF-44132
$232.18This generic Steel Belt, 87″ Assy is suitable for Mutoh Toucan 87 printers. The Mutoh part number DF-44132, which was discontinued and is no longer available as an original part, is matched by this high-quality generic steel belt. This Steel Belt, 87″ Assy is 482.5cm long and 2.5cm wide.
SKU: PBEMUTO6002O
Manufacturer part number: DF-44132
Manufacturers: DIGIPRINT , Mutoh
Roland VS / Mimaki JV5 Capping Unit
$45.23This generic unit for capping printers is suitable for Mimaki JV5 and JV33.
SKU: PCAMIJV5001
Manufacturers: DIGIPRINT , Mimaki , Roland
Xaar 128/40 Printhead Adapter for Witcolor Printers
$56.25This Xaar 128/40 printhead adapter is compatible with Witcolor Ultra 3320 and Ultra 860 printers. This was the original Witcolor component. Standard Xaar 128/40 printheads can be used with Witcolor printers that used special heads with the blue board thanks to this adapter.
SKU: PADWI11289
Manufacturer: Wit-Color
TX2-1600 Hose Joint – M601138
$43.95Mimaki TX2-1600 printers are compatible with this Hose Joint. The outer diameter of this Hose Joint is 34.1mm, while the inner diameter is 19.05mm. This is original Mimaki part (number M601138).
SKU: M601138
Manufacturer part number: M601138
Manufacturer: Mimaki
Related Products
VJ-1604 Steel Belt – DF-43937
$156.19Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
QEH15CA L-Bearing (Block only)
$238.90Various Roland and Mimaki printers are compatible with this bearing block, QEH15CA.
SKU: QEH15CA
Manufacturer part number: QEH15CA
Manufacturers: Roland , Mimaki
CJV300 Timing Belt – 100S2M210
$28.83Printers in the CJV300, CJV150, JV150, and JV300 series can use this timing belt.
SKU: 10379
Manufacturer part number: 100S2M210
Manufacturer: Mimaki
REX-62 Connector 30P Cable – ECARC02-0005
$51.47This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
SummaSign BELT X-MOTOR 110T,W=0.25 – MB9124
$28.83Summa SummaSign cutters are compatible with this BELT X-MOTOR 110T, W=0.25.
SKU: 007828
Manufacturer part number: MB9124
Manufacturer: Summa
Summa S Class Kit S(2) 120 Flat Cable – KIT-2030
$416.04This KIT FLATCABLES S120T is suitable for Summa S Class 12 cutters. This is the original Summa part (replacing part number 395-405).
Printer compatibility
Summa S-Class-120-T-Series
Reviews
There are no reviews yet.