Description
This Bearing holder V320 is suitable for Mimaki JV5-320S & JV5-260S printers. This is the original Mimaki part (number M205571).
Additional information
Additional information
| Ink Type | Aqueous, Direct to Garment, DTF, Dye, Dye Sublimation, Eco-Solvent, Edible, Hard Solvent, Latex, Low Solvent, Mild Solvent, Pigment, UV, UV Curable |
|---|---|
| Printer Brand | Agfa, Brother, Canon, Epson, Fuji, Homer, HP, Kiaro, Kornit, Kyosera, Mimaki, Mutoh, Noritsu, NUR, Oce, Oki, Ricoh, Roland, Seiko, STS, Vutek |
| Printer Model | Jeti Titan 3020, Jeti Titan HS, Jeti Titan S |
| Printer Series | Jeti Mira Series, Jeti Tauro Series, Jeti Titen Series |
More Products
This product has multiple variants. The options may be chosen on the product page
This product has multiple variants. The options may be chosen on the product page
Roland L-BEARING,RSR9ZMUUC1+380LM – 21895134
$379.77The manufacturer has discontinued this product. Please continue reading for additional details.
SKU: 21895134
Manufacturer part number: 21895134
Manufacturer: Roland
Jetrix Male Luer Integral Lock Ring to 1/4-28 UNF Thread (20 pcs) – 00-AN00-86
$184.15This set of 20 Male Luer Integral Lock Rings to fit the Inktec Jetrix 3015FQ and 2513FRQ printers has a 1/4-28 UNF thread.
SKU: SMTLL-1/20
Manufacturer part number: 00-AN00-86
Manufacturers: Inktec , DIGIPRINT
I-Joint (2 – 3) – DG-42521
$17.58This I-Joint (2 – 3) is an original Mutoh part, suitable for a specific range of Mutoh printers.
SKU: DG-42521
Manufacturer part number: DG-42521
Manufacturer: Mutoh
Osprey 75 Steel Belt Assy – DF-47847
$266.00Mutoh Osprey 75 printers can use this generic Steel Belt (19) Assy. This is a high quality steel belt that corresponds to Mutoh part number DF-47847. This Steel Belt is 5.54m long and 250mm wide.
SKU: PMEMUOS6015O
Manufacturer part number: DF-47847
Manufacturers: DIGIPRINT , Mutoh
GS Series Fitting Luer 3/32 Female (10 pcs) – P2122-A
$42.09For VUTEk GS-Series printers, this set of 10 Fitting Luer -> 3/32 Female is suitable. These connectors have a female ISO Luer lock on one side and an 3/32 inch tube hose barb on the other side. This is the original VUTEk part (number P2122-A).
SKU: PCNVU12631
Manufacturer part number: P2122-A
Manufacturer: EFI
TS500 Cap Rubber G540F – M700682
$77.06For Mimaki printers, this TS500 Cap Rubber G540F – M700682 is suitable.
SKU: M700682
Manufacturer part number: M700682
Manufacturer: Mimaki
Related Products
Carriage Drive Timing Belt
$182.62Specific printers can use this carriage drive timing belt.
SKU: 88S3M312
Manufacturer: DIGIPRINT
VJ-1604 Bearing – KY-14620
$4.57Mutoh Valuejet 1604 printers can use this generic bearing.
SKU: PMEMUVJ002O
Manufacturer part number: KY-14620
Manufacturers: DIGIPRINT , Mutoh
VJ-1604 CR Speed Reduction Belt – DF-43940
$56.70Mutoh Valuejet 1604 printers are compatible with this CR speed reduction belt. The original Mutoh component (DF-43940) can be found here. The circumference of this 10-millimeter-wide CR speed reduction belt is 240 millimeters.
SKU: PBEMUVJ6002
Manufacturer part number: DF-43940
Manufacturer: Mutoh
VP-540 L-Bearing, SSR15XW1GGE (Block only)
$302.13Several Roland printers are compatible with this bearing block, SSR15XW1GGE (see compatibility list below).
SKU: SSR 15 X W SS G
Manufacturer part number: 1000002145
Manufacturer: Roland
XJ-640 Belt,150S2M2754LW-C – 1000003688
$644.02Roland XJ-640 printers can use this generic belt.
SKU: PBEROXJ6001O
Manufacturer part number: 1000003688
Manufacturers: DIGIPRINT , Roland
Summa S Class Kit S(2) 120 Flat Cable – KIT-2030
$416.04This KIT FLATCABLES S120T is suitable for Summa S Class 12 cutters. This is the original Summa part (replacing part number 395-405).
Printer compatibility
Summa S-Class-120-T-Series
Reviews
There are no reviews yet.