Description
This Bearing holder V320 is suitable for Mimaki JV5-320S & JV5-260S printers. This is the original Mimaki part (number M205571).
Additional information
Additional information
| Ink Type | Aqueous, Direct to Garment, DTF, Dye, Dye Sublimation, Eco-Solvent, Edible, Hard Solvent, Latex, Low Solvent, Mild Solvent, Pigment, UV, UV Curable |
|---|---|
| Printer Brand | Agfa, Brother, Canon, Epson, Fuji, Homer, HP, Kiaro, Kornit, Kyosera, Mimaki, Mutoh, Noritsu, NUR, Oce, Oki, Ricoh, Roland, Seiko, STS, Vutek |
| Printer Model | Jeti Titan 3020, Jeti Titan HS, Jeti Titan S |
| Printer Series | Jeti Mira Series, Jeti Tauro Series, Jeti Titen Series |
More Products
JV33 2 T Joint M6 – M602148
$5.17Mimaki JV33 printers are compatible with this 2 T Joint M6. This is the original part from Mimaki, number M602148.
SKU: M602148
Manufacturer part number: M602148
Manufacturer: Mimaki
Osprey Steel Belt (33) Assy – DF-49599
$455.50This generic Steel Belt (33) Assy is suitable for Mutoh Osprey printers. The Mutoh part number for this high-quality belt is DF-49599. The original Mutoh part has been discontinued. The length and width of this Steel Belt (33) Assy are 2.5 centimeters.
SKU: PMEMUOS6031O
Manufacturer part number: DF-49599
Manufacturers: DIGIPRINT , Mutoh
BELT,FHT-2*T1909*W14 – 1000024958
$1,506.24The manufacturer has discontinued this product. Please scroll down for more information below.
SKU: 1000024958
Manufacturer part number: 1000024958
Manufacturer: Roland
BELT,638P2M4-530 – 1000000783
$96.19This BELT,638P2M4-530 is suitable for Roland AJ-1000 printers. The original component (number 1000000783) is here.
SKU: 1000000783
Manufacturer part number: 1000000783
Manufacturer: Roland
Epson L1800 capping unit (2pcs)
$116.64This generic capping unit set is suitable for a wide range of Epson L1800 printhead based DTF printers.
SKU: PCAEP3900
Manufacturer part number: F173090
Manufacturer: Epson
VS-420 Belt, 150S2M1539LW-C – 1000007235
$56.38Roland VS-420 printers can use this generic belt. The Roland part number 1000007235 is matched by this generic component. This belt is 15 mm wide and 3078 mm long.
SKU: PBERO12359O
Manufacturer part number: 1000007235
Manufacturers: DIGIPRINT , Roland
Related Products
JV33 Y Drive Belt – M800982
$163.41Mimaki JV33 printers are compatible with this generic Y drive belt, which is also known as a carriage belt.
SKU: PBEMIJV3301S
Manufacturer part number: M800982
Manufacturers: Mimaki , DIGIPRINT
VJ-1604 Bearing – KY-14620
$4.57Mutoh Valuejet 1604 printers can use this generic bearing.
SKU: PMEMUVJ002O
Manufacturer part number: KY-14620
Manufacturers: DIGIPRINT , Mutoh
Carriage Drive Timing Belt
$182.62Specific printers can use this carriage drive timing belt.
SKU: 88S3M312
Manufacturer: DIGIPRINT
JV3 Y Timing Belt – 150 S2M 380G
$14.42Mimaki JV3, JV33, and JV5 series printers can use this generic speed reduction belt.
SKU: S2M-380-15MM
Manufacturer part number: 150 S2M 380G
Manufacturers: Mimaki , DIGIPRINT
REX-62 Connector 30P Cable – ECARC02-0005
$51.47This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
S Class 75 KIT FLATCABLES S75T – 395-403
$240.67This KIT FLATCABLES S75T is suitable for Summa S Class 75 cutters. This is the original Summa part (number 395-403).
Printer compatibility
Summa S-Class-75-T-Series
Reviews
There are no reviews yet.