Description
Mimaki printers in the JV5, JV33, and CJV30 series can use this joint Valve Assy. This is the original part for the Mimaki (number M006954). This is the valve located on top of the damper on JV5 printers.
CG-160FX Toothed Belt 160 – M800709
$534.55This Toothed Belt 160 is suitable for Mimaki CG-160FX cutting plotters.
SKU: PBEMI11471
Manufacturer part number: M800709
Manufacturer: Mimaki
Square Waste Ink Tank 2L – SPA-0246
$62.92This original Square Waste Ink Tank 2L is compatible with Mimaki printers.
SKU: SPA-0246
Manufacturer part number: SPA-0246
Manufacturer: Mimaki
BELT,150S2M2428LW-C – 1000010581
$892.73This product has been discontinued by the manufacturer. Please scroll down for more information below.
SKU: 1000010581
Manufacturer part number: 1000010581
Manufacturer: Roland
Epson XP600 / TX800 capping unit
$42.02This generic capping unit is compatible with a wide range of DTF printers based on printheads made by Epson XP600/TX800.
SKU: PCAEPXP601
Manufacturers: Epson , DIGIPRINT
CJ-400 CONNECTOR – 13439201
$3.16The manufacturer has discontinued this product. Please scroll down for more information below.
SKU: 13439201
Manufacturer part number: 13439201
Manufacturer: Roland
QS Series Fitting Luer 1/8 Male (10 pcs) – P1922-A
$77.35The VUTEk UltraVU 150, PressVU 200/600, and QS-series printers can all use this set of 10 Fitting Luer 1/8 Males. On one side, these connectors have a 1/8-inch tube hose barb and a male ISO Luer lock on the other. P1922-A is the original VUTEk component.
SKU: PCNVU12611
Manufacturer part number: P1922-A
Manufacturer: EFI
Related Products
Carriage Drive Timing Belt
$182.62Specific printers can use this carriage drive timing belt.
SKU: 88S3M312
Manufacturer: DIGIPRINT
QEH15CA L-Bearing (Block only)
$238.90Various Roland and Mimaki printers are compatible with this bearing block, QEH15CA.
SKU: QEH15CA
Manufacturer part number: QEH15CA
Manufacturers: Roland , Mimaki
CG1107 Assy, Main Board – 6000003126
$1,845.96This Assy, Main Board is suitable for Roland printers. This is the original Roland part (number 6000003126). Printer compatibility Roland GR-540 Roland GR-640 Roland GR-420 Product specifications Type Main Boards
JV33 Y Drive Belt – M800982
$163.41Mimaki JV33 printers are compatible with this generic Y drive belt, which is also known as a carriage belt.
SKU: PBEMIJV3301S
Manufacturer part number: M800982
Manufacturers: Mimaki , DIGIPRINT
VJ-1608HS CR Deceleration Belt Assy – DG-42458
$52.86Mutoh VJ-1608HS printers can use this generic CR Deceleration Belt Assy.
SKU: 011011
Manufacturer part number: DG-42458
Manufacturers: DIGIPRINT , Mutoh
CJ-540 Belt, 408P2M4-530 – 11929138
$16.00Roland CJ-540 printers are compatible with this generic belt, 408P2M4-530.
SKU: 008055
Manufacturer part number: 11929138
Manufacturers: Roland , DIGIPRINT
Reviews
There are no reviews yet.