Description
This pulley belt 40 S2M 754UG is suitable for Mimaki JV3 printers. This is the original Mimaki part. This pulley belt has a diameter of 75cm long.
More Products
This product has multiple variants. The options may be chosen on the product page
Jetrix Male Luer Integral Lock Ring to Female Luer Thread Style Plug (100 pc) – 00-AN00-89
$343.30For the Inktec Jetrix 3015FQ and 2513FRQ printers, this set of 100 Male Luer Integral Lock Ring to Female Luer Thread Style Plug is appropriate.
SKU: LP34/1
Manufacturer part number: 00-AN00-89
Manufacturer: Inktec
Y Tube Fitting ID Tubing 1.6MM Nylon Black (100 pcs)
$289.09This set of 100 black nylon Y tube fittings that resist solvents is compatible with all wide format inkjet printers.
SKU: Y210/2
Manufacturer: DIGIPRINT
Roland BELT,150S2M555LW-C – 11929136
$350.34This product has been discontinued by the manufacturer. For more information, please continue reading.
SKU: 11929136
Manufacturer part number: 11929136
Manufacturer: Roland
TX400-1800D Joint Valve (L) Assy – M009844
$55.60This TX400-1800D Joint Valve (L) Assy – M009844 is suitable for Mimaki printers.
SKU: M009844
Manufacturer part number: M009844
Manufacturer: Mimaki
CJV30-160 Y Drive Belt C 160 – M801102
$465.20This carriage belt is suitable for Mimaki CJV30-160 printers.
SKU: M801102
Manufacturer part number: M801102
Manufacturer: Mimaki
This product has multiple variants. The options may be chosen on the product page
CX-24 L-Bearing, SRS9XGMUUC1+680LM – 1000012576
$396.86This L-Bearing, SRS9XGMUUC1+680LM, is compatible with Roland cutting plotters CX-24 and GX-24.
SKU: 1000012576
Manufacturer part number: 1000012576
Manufacturer: Roland
Related Products
SJ-740 L-Bearing SSR15XW1UUE – 21895153 (Block only)
$306.56For some Roland printers, this generic bearing block, SSR15XW1UUE, is suitable.
SKU: PMERO17713
Manufacturer part number: 21895154
Manufacturers: Roland , DIGIPRINT
VJ-1608HS CR Deceleration Belt Assy – DG-42458
$52.86Mutoh VJ-1608HS printers can use this generic CR Deceleration Belt Assy.
SKU: 011011
Manufacturer part number: DG-42458
Manufacturers: DIGIPRINT , Mutoh
JV3 Y Timing Belt – 150 S2M 380G
$14.42Mimaki JV3, JV33, and JV5 series printers can use this generic speed reduction belt.
SKU: S2M-380-15MM
Manufacturer part number: 150 S2M 380G
Manufacturers: Mimaki , DIGIPRINT
JV33 Y Drive Belt – M800982
$254.72This product has been discontinued by the manufacturer. Please continue reading for additional details.
SKU: M800982
Manufacturer part number: M800982
Manufacturer: Mimaki
JV33 Y Drive Belt – M800982
$163.41Mimaki JV33 printers are compatible with this generic Y drive belt, which is also known as a carriage belt.
SKU: PBEMIJV3301S
Manufacturer part number: M800982
Manufacturers: Mimaki , DIGIPRINT
QEH15SA L-Bearing (Block only)
$168.63Various Roland and Mimaki printers are compatible with this bearing block, QEH15SA.
SKU: QEH15SA
Manufacturer part number: QEH15SA
Manufacturers: Roland , Mimaki
Reviews
There are no reviews yet.