Description
This original Mutoh part, an L Type Fitting VJ Waste, is compatible with a specific Mutoh printer line. The Mutoh part number is DG-41175.
VS-640 ADAPTER,SHAFT TUC-2 – 1000009860
$157.54The Roland VS-300, VS-420, VS-540, VS-640, VG-540, VG-640, VS-300i, VS-540i, VS-640i, VP-300, VP-540, VP-300i, VP-540i, SP-300v, SP-300i, SP-540i, RS-540, RS-640, RA-640, and RE-640 printers are compatible with this adapt This is the original Roland part (number 1000009860).
SKU: 1000009860
Manufacturer part number: 1000009860
Manufacturer: Roland
Osprey 75 Steel Belt Assy – DF-47847
$266.00Mutoh Osprey 75 printers can use this generic Steel Belt (19) Assy. This is a high quality steel belt that corresponds to Mutoh part number DF-47847. This Steel Belt is 5.54m long and 250mm wide.
SKU: PMEMUOS6015O
Manufacturer part number: DF-47847
Manufacturers: DIGIPRINT , Mutoh
Steel Belt Assy – DG-49304
$222.05This Steel Belt Assy is an original Mutoh part, suitable for a specific range of Mutoh printers.
SKU: DG-49304
Manufacturer part number: DG-49304
Manufacturer: Mutoh
ADAPTER,JUNCTION – 1000017828
$13.89This ADAPTER, JUNCTION is a genuine Roland component that is compatible with a particular line of Roland printers.
SKU: 1000017828
Manufacturer part number: 1000017828
Manufacturer: Roland
CONNECTOR,SAFETY SWITCH – 1000021905
$380.11This CONNECTOR,SAFETY SWITCH is an original Roland part, suitable for a specific range of Roland printers.
SKU: 1000021905
Manufacturer part number: 1000021905
Manufacturer: Roland
TX300P CP PAD SET – SPA-0269
$238.16Mimaki printers with the TS300P and Tx300P models can use this CP Pad set.
SKU: SPA-0269
Manufacturer part number: SPA-0269
Manufacturer: Mimaki
Related Products
VJ-1608HS CR Deceleration Belt Assy – DG-42458
$52.86Mutoh VJ-1608HS printers can use this generic CR Deceleration Belt Assy.
SKU: 011011
Manufacturer part number: DG-42458
Manufacturers: DIGIPRINT , Mutoh
XJ-640 Belt,150S2M2754LW-C – 1000003688
$644.02Roland XJ-640 printers can use this generic belt.
SKU: PBEROXJ6001O
Manufacturer part number: 1000003688
Manufacturers: DIGIPRINT , Roland
CJV300 Timing Belt – 100S2M210
$28.83Printers in the CJV300, CJV150, JV150, and JV300 series can use this timing belt.
SKU: 10379
Manufacturer part number: 100S2M210
Manufacturer: Mimaki
SummaSign BELT X-MOTOR 110T,W=0.25 – MB9124
$28.83Summa SummaSign cutters are compatible with this BELT X-MOTOR 110T, W=0.25.
SKU: 007828
Manufacturer part number: MB9124
Manufacturer: Summa
REX-62 Connector 30P Cable – ECARC02-0005
$51.47This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
VJ-1604 Steel Belt – DF-43937
$156.19Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
Reviews
There are no reviews yet.