Description
This ADAPTER,CARRIAGE R is suitable for Roland LEC-330 printers. This is the original Roland part (number 1000006192).
More Products
VJ-1304 Scroller Support Bearing Assy – DG-41135
$111.75This Scroller Support Bearing Assy is suitable for Mutoh Valuejet 1304 printers. The original Mutoh component (number DG-41135) is here.
SKU: DG-41135
Manufacturer part number: DG-41135
Manufacturer: Mutoh
S Series Assy 2nd Ink Tank Cover 3 Out – AA94011
$1,985.72This Assy 2nd Ink Tank Cover 3 Out is suitable for VUTEk QS series printers. This is the original VUTEk part (number AA94011). This Assy 2nd Ink Tank Cover 3 Out has a cable that is 32.9 centimeters long.
GS Series Fitting Luer 3/32 Female (10 pcs) – P2122-A
$42.09For VUTEk GS-Series printers, this set of 10 Fitting Luer -> 3/32 Female is suitable. These connectors have a female ISO Luer lock on one side and an 3/32 inch tube hose barb on the other side. This is the original VUTEk part (number P2122-A).
SKU: PCNVU12631
Manufacturer part number: P2122-A
Manufacturer: EFI
DIGIMEDIA Monomeric Gloss Overlaminate – 1524 mm x 50 m (60″ x 164′)
$251.42High-quality, self-adhesive 70 clear monomeric vinyl with UV protection and an acrylic-based, high-tack, permanent adhesive. This competitive calendered vinyl, which comes in gloss and matte finishes, is an excellent lamination for protecting digitally printed images. Easy to clean, this film can also be used as anti-graffiti protection. As low as €1.05 per square meter.
SKU: DLMG60
Manufacturer part number: DLMG60
Manufacturer: DIGIPRINT
Mimaki / Roland / Mutoh Solvent Resistant Y Connector (ID: 2mm, OD: 3mm)
$15.08This Y connector with a solvent resistance helps connect three tubes with an ID of 2 mm and an OD of 3 mm.
SKU: PCNDI8747
Manufacturers: DIGIPRINT , Mutoh , Roland , Mimaki
DIGIMEDIA Monomeric Matte Overlaminate – 1600 mm x 50 m (63″ x 164′)
$277.82High-quality, self-adhesive 70 clear monomeric vinyl with UV protection and an acrylic-based, high-tack, permanent adhesive. This competitive calendered vinyl, which comes in gloss and matte finishes, is an excellent lamination for protecting digitally printed images. Easy to clean, this film can also be used as anti-graffiti protection.
SKU: DLMM63
Manufacturer part number: DLMM63
Manufacturer: DIGIPRINT
Related Products
VP-540 L-Bearing, SSR15XW1GGE (Block only)
$302.13Several Roland printers are compatible with this bearing block, SSR15XW1GGE (see compatibility list below).
SKU: SSR 15 X W SS G
Manufacturer part number: 1000002145
Manufacturer: Roland
VJ-1604 Steel Belt – DF-43937
$156.19Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
VJ-1608HS CR Deceleration Belt Assy – DG-42458
$52.86Mutoh VJ-1608HS printers can use this generic CR Deceleration Belt Assy.
SKU: 011011
Manufacturer part number: DG-42458
Manufacturers: DIGIPRINT , Mutoh
REX-62 Connector 30P Cable – ECARC02-0005
$51.47This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
JV3 Y Timing Belt – 150 S2M 380G
$11.39Mimaki JV3, JV33, and JV5 series printers are compatible with this generic speed reduction belt.
SKU: PBEMIJV305O
Manufacturer part number: 150 S2M 380G
Manufacturer: DIGIPRINT
SummaSign BELT X-MOTOR 110T,W=0.25 – MB9124
$28.83Summa SummaSign cutters are compatible with this BELT X-MOTOR 110T, W=0.25.
SKU: 007828
Manufacturer part number: MB9124
Manufacturer: Summa
Reviews
There are no reviews yet.