Description
Marabu Clearshield® Classic is a water-based liquid clear-coat that offers UV-protection, chemical resistance, abrasion resistance and flexibility to any print. All solvent, eco-solvent, latex, and UV inks can be used with ClearShield® Classic, which is designed to be used with a wide variety of non-water-sensitive media like banners and self-adhesive vinyl.
Benefits :
ClearShield® liquid coatings offer the same protection as film laminates while saving as much as 60% in production costs. Liquid coating is easy to use and does not require expensive equipments. In contrast to lamination films, there is no risk of bubbling or misalignment with liquid coating.
Specifications :
Product type : Water based liquid coating
Durability: 5-7 years outdoor with UV Curable inks
Finish : Gloss, Semi-Gloss or Matt
Viscosity : Shell Cup #3 30-35 sec
VOC : 48g/L
PH : 8.5 -9.0
Application : Short-Nap roller or High Density Foam Roller
Ink compatibility : Solvent and UV inks.
Media compatibilty : adhesive vinyl, banners
Coverage of 1L : around 14-15m2 with Roller
Applications :
Banners
Billboards
Canvas Prints
Signage
Wall covering
Vehicle Graphics
Application Method :
Manual application : Roll the clearshield coating onto the prints using a short-nap roller or a white high-density foam roller. Apply two layers, waiting approximately an hour in-between to complete drying.
Products available :
ClearShield® Classic Gloss – 1L – 360297911
ClearShield® Classic Gloss – 5L – 360298911
ClearShield® Classic Semi Gloss – 1L – 360297912
ClearShield® Classic Semi Gloss – 5L – 360298912
ClearShield® Classic Matte ++ – 1L – 360297924
ClearShield® Classic Matte ++ – 5L – 360298924
Roland BELT,992P2M6 530 – 11929144
$95.36This product has been discontinued by the manufacturer. Please continue reading for additional details.
SKU: 11929144
Manufacturer part number: 11929144
Manufacturer: Roland
VJ-1304 Scroller Support Bearing Assy – DG-41135
$111.75This Scroller Support Bearing Assy is suitable for Mutoh Valuejet 1304 printers. The original Mutoh component (number DG-41135) is here.
SKU: DG-41135
Manufacturer part number: DG-41135
Manufacturer: Mutoh
TX400-1800 Y Drive Belt 24-180T – M801167
$901.94Mimaki TX400-1800 printers are compatible with this Y Drive Belt 24-180T.
SKU: M801167
Manufacturer part number: M801167
Manufacturer: Mimaki
TS300P-1800 Cap Assy – M015950
$161.12Mimaki printers can use this TS300P-1800 Cap Assy.
SKU: M015950
Manufacturer part number: M015950
Manufacturer: Mimaki
S60 Carriage Belt – 990.0346.04
$75.89The Secabo S120 cutting plotters can use this carriage belt. This is the original Secabo part (number 990.0346.02). This carriage belt has a width of 9 mm and a length of 2813 mm.
SKU: 990.0346.04
Manufacturer part number: 990.0346.04
Manufacturer: Secabo
Fitting f3 – M603012
$2.40Mimaki CJV150 and CJV300 printers are compatible with this Fitting Assy.
SKU: M603012
Manufacturer part number: M603012
Manufacturer: Mimaki
Related Products
DIGIMEDIA Polymeric Matte Overlaminate – 1372 mm x 50 m (54″ x 164′) – PALLET
$379.38
DIGIMEDIA Polymeric Matte Overlaminate – 1372 mm x 50 m (54″ x 164′)
$344.88
DIGIMEDIA Monomeric Gloss Overlaminate – 1524 mm x 50 m (60″ x 164′)
$251.42High-quality, self-adhesive 70 clear monomeric vinyl with UV protection and an acrylic-based, high-tack, permanent adhesive. This competitive calendered vinyl, which comes in gloss and matte finishes, is an excellent lamination for protecting digitally printed images. Easy to clean, this film can also be used as anti-graffiti protection. As low as €1.05 per square meter.
SKU: DLMG60
Manufacturer part number: DLMG60
Manufacturer: DIGIPRINT
Marabu ClearShield® Anti-Graffiti Part A, Gloss – 1 Gallon
$307.57Marabu Clearshield® Anti-Graffiti is a two-part, water-based liquid clear coat that protects any print from UV rays, resists chemicals and abrasion, and has unparalleled anti-graffiti properties. It is made to protect non-water-sensitive media like vinyl and banners printed with UV, solvent, and Latex inks from graffiti made with spray paint, latex paint, markers, and other materials.
SKU: 360259581
Manufacturer part number: 360259581
Manufacturer: Marabu
DIGIMEDIA Monomeric Matte Overlaminate – 1372 mm x 50 m (54″ x 164′)
$227.50
Marabu Clearshield® Wall Armor – 20L, Satin
$1,116.30Marabu Clearshield® Wall Armor is a water-based liquid coating that offers stain, scratch and abrasion resistance as well as fire retardancy to your digital wall covering prints. Eco-solvent, UV-curable, and latex inks are all compatible with Clearshield® Wall Armor.
SKU: 360299853
Manufacturer part number: 360299853
Manufacturer: Marabu
Reviews
There are no reviews yet.