Description
Marabu Clearshield® Classic is a water-based liquid clear-coat that offers UV-protection, chemical resistance, abrasion resistance and flexibility to any print. All solvent, eco-solvent, latex, and UV inks can be used with ClearShield® Classic, which is designed to be used with a wide variety of non-water-sensitive media like banners and self-adhesive vinyl.
Benefits :
ClearShield® liquid coatings offer the same protection as film laminates while saving as much as 60% in production costs. Liquid coating is easy to use and does not require expensive equipments. In contrast to lamination films, there is no risk of bubbling or misalignment with liquid coating.
Specifications :
Product type : Water based liquid coating
Durability: 5-7 years outdoor with UV Curable inks
Finish : Gloss, Semi-Gloss or Matt
Viscosity : Shell Cup #3 30-35 sec
VOC : 48g/L
PH : 8.5 -9.0
Application : Short-Nap roller or High Density Foam Roller
Ink compatibility : Solvent and UV inks.
Media compatibilty : adhesive vinyl, banners
Coverage of 1L : around 14-15m2 with Roller
Applications :
Banners
Billboards
Canvas Prints
Signage
Wall covering
Vehicle Graphics
Application Method :
Manual application : Roll the clearshield coating onto the prints using a short-nap roller or a white high-density foam roller. Apply two layers, waiting approximately an hour in-between to complete drying.
Products available :
ClearShield® Classic Gloss – 1L – 360297911
ClearShield® Classic Gloss – 5L – 360298911
ClearShield® Classic Semi Gloss – 1L – 360297912
ClearShield® Classic Semi Gloss – 5L – 360298912
ClearShield® Classic Matte ++ – 1L – 360297924
ClearShield® Classic Matte ++ – 5L – 360298924
LEF-20 Carton, Support – 1000011794
$79.86This product has been discontinued by the manufacturer. Please scroll down for more information below.
SKU: 1000011794
Manufacturer part number: 1000011794
Manufacturer: Roland
JV3 ID Point Of Contact PCB CN032 – E105363
$29.88This ID Point Of Contact PCB CN032 is suitable for Mimaki JV3 / JV33 / JV5 and CJV30 series printers.
LC BIS Connector 3mm – 4mm – FC-402007
$14.07Mutoh printers with a bulk ink system can use this connector, which has a diameter of 3 to 4 mm. The original Mutoh part (number FC-402007) can be found here.
SKU: FC-402007
Manufacturer part number: FC-402007
Manufacturer: Mutoh
UJV100-160 Sub Tank Assy – MP-M012080
$371.44Mimaki UJV100-160 printers are compatible with this Sub Tank Assembly.
SKU: MP-M012080
Manufacturer part number: MP-M012080
Manufacturer: Mimaki
UJF-7151 Plus Cap Rubber – M700970
$30.13Mimaki printers are compatible with this UJF-7151 Plus Cap Rubber – M700970.
SKU: M700970
Manufacturer part number: M700970
Manufacturer: Mimaki
JF Series MES20 Block
$579.04This Block MES20 is suitable for Mimaki JF-1610 & JF-1631 series printers. This part includes the block only (without the rail) that corresponds to part number MES20C2R3700 & MES20C2R1480. This is the full block with ball bearings mounted in.
SKU: MES20C1HS2
Manufacturer part number: MES20
Manufacturer: Mimaki
Related Products
DIGIMEDIA Monomeric Gloss Overlaminate – 1372 mm x 50 m (54″ x 164′)
$228.14
DIGIMEDIA Monomeric Matte Overlaminate – 1372 mm x 50 m (54″ x 164′)
$227.50
Marabu ClearShield Classic – 1L, Semi-Gloss
$76.53Marabu Clearshield® Classic is a water-based liquid clear-coat that offers UV-protection, chemical resistance, abrasion resistance and flexibility to any print. All solvent, eco-solvent, latex, and UV inks can be used with ClearShield® Classic, which is designed to be used with a wide variety of non-water-sensitive media like banners and self-adhesive vinyl.
SKU: 360297912
Manufacturer part number: 360297912
Manufacturer: Marabu
Marabu ClearShield® Anti-Graffiti Part A, Gloss – 1 Gallon
$307.57Marabu Clearshield® Anti-Graffiti is a two-part, water-based liquid clear coat that protects any print from UV rays, resists chemicals and abrasion, and has unparalleled anti-graffiti properties. It is made to protect non-water-sensitive media like vinyl and banners printed with UV, solvent, and Latex inks from graffiti made with spray paint, latex paint, markers, and other materials.
SKU: 360259581
Manufacturer part number: 360259581
Manufacturer: Marabu
DIGIMEDIA Monomeric Gloss Overlaminate – 1600 mm x 50 m (63″ x 164′)
$277.82High-quality, self-adhesive 70 clear monomeric vinyl with UV protection and an acrylic-based, high-tack, permanent adhesive. This competitive calendered vinyl, which comes in gloss and matte finishes, is an excellent lamination for protecting digitally printed images. Easy to clean, this film can also be used as anti-graffiti protection. As low as €1.05 per square meter
SKU: DLMG63
Manufacturer part number: DLMG63
Distributor: DIGIPRINT
Marabu Clearshield® Wall Armor – 20L, Satin
$1,116.30Marabu Clearshield® Wall Armor is a water-based liquid coating that offers stain, scratch and abrasion resistance as well as fire retardancy to your digital wall covering prints. Eco-solvent, UV-curable, and latex inks are all compatible with Clearshield® Wall Armor.
SKU: 360299853
Manufacturer part number: 360299853
Manufacturer: Marabu
Reviews
There are no reviews yet.