Description
Marabu Clearshield® Classic is a water-based liquid clear-coat that offers UV-protection, chemical resistance, abrasion resistance and flexibility to any print. ClearShield® Classic is formulated for use with a wide range of non-water-sensitive media such as banner or self-adhesive vinyl and all solvent, eco-solvent, Latex and UV inks
Benefits :
ClearShield® liquid coatings offer the same protection as film laminates while saving as much as 60% in production costs. Liquid coating is easy to use and does not require expensive equipments. In contrast to lamination films, there is no risk of bubbling or misalignment with liquid coating.
Specifications :
Product type : Water based liquid coating
Durability: 5-7 years outdoor with UV Curable inks
Finish : Gloss, Semi-Gloss or Matt
Viscosity : Shell Cup #3 30-35 sec
VOC : 48g/L
PH : 8.5 -9.0
Application : Short-Nap roller or High Density Foam Roller
Ink compatibility : Solvent and UV inks.
Media compatibilty : adhesive vinyl, banners
Coverage of 1L : around 14-15m2 with Roller
Applications :
Banners
Billboards
Canvas Prints
Signage
Wall covering
Vehicle Graphics
Application Method :
Manual application : Roll the clearshield coating onto the prints using a short-nap roller or a white high-density foam roller. Apply two layers, waiting approximately an hour in-between to complete drying.
Products available :
ClearShield® Classic Gloss – 1L – 360297911
ClearShield® Classic Gloss – 5L – 360298911
ClearShield® Classic Semi Gloss – 1L – 360297912
ClearShield® Classic Semi Gloss – 5L – 360298912
ClearShield® Classic Matte ++ – 1L – 360297924
ClearShield® Classic Matte ++ – 5L – 360298924
Marabu Clearshield® Classic Lite – 5L – Semi-Gloss
$306.08Marabu Clearshield® Classic is a water-based liquid coating with a low viscosity that provides enhanced UV protection as well as chemical and abrasion resistance. can be applied with a brush, roller, or automated spray equipment or by hand. If you’re looking for a laminate with a lower viscosity, Classic Lite is an option that provides the same excellent protection as ClearShield Classic.
SKU: 360298812
Manufacturer part number: 360298812
Manufacturer: Marabu
Belt, Carriage Drive – 3010110729
$2,901.92Océ Arizona 6100 series printers can use this Belt Carriage Drive.
SKU: 3010110729
Manufacturer part number: 3010110729
Manufacturer: Canon Océ
Roland L-BEARING,HSR15R1/2SSE+580/700 2PCS – 1000004139
$3,955.17The manufacturer has discontinued this product. Please scroll down for more information below.
SKU: 1000004139
Manufacturer part number: 1000004139
Manufacturer: Roland
FP-740 Carton, Shaft – 1000001178
$29.25This product has been discontinued by the manufacturer. Please scroll down for more information below.
SKU: 1000001178
Manufacturer part number: 1000001178
Manufacturer: Roland
GS Series Fitting Luer Male .170 Barb (20 pcs) – P4812-A
$159.85VUTEk QS- and GS-Series printers are compatible with this set of 20 Fitting Luer Male.170.
SKU: MTLL445-1/20
Manufacturer part number: P4812-A
Manufacturer: EFI
Arizona 250 Belt GT – 3010103684
$437.36Océ Arizona 250 GT printers can use this generic Belt Gantry GT.
SKU: PBEOC13517O
Manufacturer part number: 3010103684
Manufacturer: DIGIPRINT
Related Products
DIGIMEDIA Monomeric Overlaminate
$228.14High-quality, self-adhesive 70 clear monomeric vinyl with UV protection and an acrylic-based, high-tack, permanent adhesive. This competitive calendered vinyl, which comes in gloss and matte finishes, is an excellent lamination for protecting digitally printed images. Easy to clean, this film can also be used as anti-graffiti protection. Prices start at €1.20 per square meter.
SKU: DLMG54
Manufacturer part number: DLMG54
Manufacturer: DIGIPRINT
DIGIMEDIA Monomeric Gloss Overlaminate – 1524 mm x 50 m (60″ x 164′)
$251.42High-quality, self-adhesive 70 clear monomeric vinyl with UV protection and an acrylic-based, high-tack, permanent adhesive. This competitive calendered vinyl, which comes in gloss and matte finishes, is an excellent lamination for protecting digitally printed images. Easy to clean, this film can also be used as anti-graffiti protection. As low as €1.05 per square meter.
SKU: DLMG60
Manufacturer part number: DLMG60
Manufacturer: DIGIPRINT
DIGIMEDIA Polymeric Matte Overlaminate – 1372 mm x 50 m (54″ x 164′)
$344.88
DIGIMEDIA Monomeric Gloss Overlaminate – 1050 mm x 50 m (42″ x 164′)
$164.50High-quality, self-adhesive monomeric 70μ clear vinyl, with UV protection and a permanent, high tack acrylic-based, adhesive. This competitive calendered vinyl, which comes in gloss and matte finishes, is an excellent lamination for protecting digitally printed images. Easy to clean, this film can also be used as anti-graffiti protection. Price per sqm: as low as €1.30 / sqm
SKU: DLMG42
Manufacturer part number: DLMG42
Manufacturer: DIGIPRINT
Marabu ClearShield® Anti-Graffiti Part A, Gloss – 1 Quart
$142.91Marabu Clearshield® Anti-Graffiti is a two-part, water-based liquid clear coat that protects any print from UV rays, resists chemicals and abrasion, and has unparalleled anti-graffiti properties. It is made to protect non-water-sensitive media like vinyl and banners printed with UV, solvent, and Latex inks from graffiti made with spray paint, latex paint, markers, and other materials.
SKU: 360264581
Manufacturer part number: 360264581
Manufacturer: Marabu
Reviews
There are no reviews yet.