Description
Marabu Clearshield® Classic Lite is a low-viscosity water-based liquid coating for enhanced UV-protection, chemical and abrasion resistance. can be applied with a brush, roller, or automated spray equipment or by hand. If you’re looking for a laminate with a lower viscosity, Classic Lite is an option that provides the same excellent protection as ClearShield Classic.
Benefits:
Lower in viscosity than ClearShield Classic Lite while offering the same great protection and media compatibility. ClearShield Classic Lite can be applied by roller or automated spray equipment.
Specifications:
Product type : Water based liquid coating
Durability: 5 years outdoor with UV Curable inks
Finish : Gloss, Semi-Gloss or Matt
Viscosity : Shell Cup #2 20 – 26 sec.
VOC : 48g/L
PH : 8.5 -9.0
Application : Short-Nap roller or High Density Foam Roller
Ink compatibility : all solvent, eco-solvent, latex and UV inks
Media compatibilty : adhesive vinyl, banners
Coverage of 1L : around 14-15m2 with Roller
Applications :
Banners
Billboards
Canvas Prints
Signage
Wall covering
Vehicle Graphics
Application Method :
Manual application : Roll the clearshield coating onto the prints using a short-nap roller or a white high-density foam roller. Apply two layers, waiting approximately an hour in-between to complete drying.
Products available :
Marabu Clearshield® Classic Lite – 5L, Semi-Gloss – 360298812
Marabu Clearshield® Classic Lite – 1L, Gloss – 360297811
LEJ-640 Joint, Pin L – 1000008720
$729.93The manufacturer has discontinued this product. Please scroll down for more information below.
SKU: 1000008720
Manufacturer part number: 1000008720
Manufacturer: Roland
Y Tube Fitting ID Tubing 6.4MM Nylon White (20 pcs)
$76.45All wide format inkjet printers can use this set of twenty solvent-resistant nylon Y tube fittings.
SKU: Y260-1/20
Manufacturer: DIGIPRINT
RS-540 Carton, Feeder – 1000005197
$43.08This product has been discontinued by the manufacturer. Please scroll down for more information below.
SKU: 1000005197
Manufacturer part number: 1000005197
Manufacturer: Roland
Rockhopper 3 Steel Belt 64 – DF-42874
$218.67This generic steel belt of 64 inches is suitable for Mutoh Rockhopper 3 65 and Spitfire 65 printers. This is a high quality generic belt that corresponds to Mutoh part number DF-42874). This belt is 4750mm long and 25mm wide.
SKU: PBEMURH001O
Manufacturer part number: DF-42874
Manufacturers: DIGIPRINT , Mutoh
UVLED Drive14 PCB Assy – MP-E108651
$1,925.32This UVLED Drive14 PCB Assy is suitable for Mimaki printers.
SKU: MP-E108651
Manufacturer part number: MP-E108651
Manufacturer: Mimaki
SWJ-320 Cap Top Base Assy For Maintenance – M016132
$336.25Mimaki SWJ-320 printers can use this Cap Top Base Assy for Maintenance.
SKU: M016132
Manufacturer: Mimaki
Related Products
DIGIMEDIA Monomeric Gloss Overlaminate – 1600 mm x 50 m (63″ x 164′)
$277.82High-quality, self-adhesive 70 clear monomeric vinyl with UV protection and an acrylic-based, high-tack, permanent adhesive. This competitive calendered vinyl, which comes in gloss and matte finishes, is an excellent lamination for protecting digitally printed images. Easy to clean, this film can also be used as anti-graffiti protection. As low as €1.05 per square meter
SKU: DLMG63
Manufacturer part number: DLMG63
Distributor: DIGIPRINT
Marabu ClearShield® Anti-Graffiti Part A, Gloss – 1 Quart
$142.91Marabu Clearshield® Anti-Graffiti is a two-part, water-based liquid clear coat that protects any print from UV rays, resists chemicals and abrasion, and has unparalleled anti-graffiti properties. It is made to protect non-water-sensitive media like vinyl and banners printed with UV, solvent, and Latex inks from graffiti made with spray paint, latex paint, markers, and other materials.
SKU: 360264581
Manufacturer part number: 360264581
Manufacturer: Marabu
DIGIMEDIA Monomeric Matte Overlaminate – 1600 mm x 50 m (63″ x 164′)
$277.82High-quality, self-adhesive 70 clear monomeric vinyl with UV protection and an acrylic-based, high-tack, permanent adhesive. This competitive calendered vinyl, which comes in gloss and matte finishes, is an excellent lamination for protecting digitally printed images. Easy to clean, this film can also be used as anti-graffiti protection.
SKU: DLMM63
Manufacturer part number: DLMM63
Manufacturer: DIGIPRINT
Marabu ClearShield ® Anti-Graffiti Part B, Gloss – 4 oz
$29.06arabu Clearshield® Anti-Graffiti is a two-part water-based liquid clear-coat that offers UV-protection, chemical resistance, abrasion resistance and unmatched anti-graffiti properties to any print. It is made to protect non-water-sensitive media like vinyl and banners printed with UV, solvent, and Latex inks from graffiti made with spray paint, latex paint, markers, and other materials.
SKU: 360261591
Manufacturer part number: 360261591
Manufacturer: Marabu
DIGIMEDIA Monomeric Gloss Overlaminate – 1372 mm x 50 m (54″ x 164′)
$228.14
Reviews
There are no reviews yet.