Description
Marabu Clearshield® Classic Lite is a low-viscosity water-based liquid coating for enhanced UV-protection, chemical and abrasion resistance. can be applied with a brush, roller, or automated spray equipment or by hand. If you’re looking for a laminate with a lower viscosity, Classic Lite is an option that provides the same excellent protection as ClearShield Classic.
Benefits:
Lower in viscosity than ClearShield Classic Lite while offering the same great protection and media compatibility. ClearShield Classic Lite can be applied by roller or automated spray equipment.
Specifications:
Product type : Water based liquid coating
Durability: 5 years outdoor with UV Curable inks
Finish : Gloss, Semi-Gloss or Matt
Viscosity : Shell Cup #2 20 – 26 sec.
VOC : 48g/L
PH : 8.5 -9.0
Application : Short-Nap roller or High Density Foam Roller
Ink compatibility : all solvent, eco-solvent, latex and UV inks
Media compatibilty : adhesive vinyl, banners
Coverage of 1L : around 14-15m2 with Roller
Applications :
Banners
Billboards
Canvas Prints
Signage
Wall covering
Vehicle Graphics
Application Method :
Manual application : Roll the clearshield coating onto the prints using a short-nap roller or a white high-density foam roller. Apply two layers, waiting approximately an hour in-between to complete drying.
Products available :
Marabu Clearshield® Classic Lite – 5L, Semi-Gloss – 360298812
Marabu Clearshield® Classic Lite – 1L, Gloss – 360297811
Arizona 250 GT Steel Belt Carriage Drive – 3010103685
$908.35Océ Arizona 250 GT printers can use this Steel Belt Carriage Drive.
SKU: SHW1.500X5XB5480-2
Manufacturer part number: 3010103685
Manufacturer: Canon Océ
Jetrix Male Luer Integral Lock Ring to 1/4-28 UNF Thread (20 pcs) – 00-AN00-86
$184.15This set of 20 Male Luer Integral Lock Rings to fit the Inktec Jetrix 3015FQ and 2513FRQ printers has a 1/4-28 UNF thread.
SKU: SMTLL-1/20
Manufacturer part number: 00-AN00-86
Manufacturers: Inktec , DIGIPRINT
QS Series Coupling, Quik .17ID Elbow VLV Simriz – 45072841
$788.92This Polypropylene Elbow coupler is suitable for VUTEk in QS and GS-series printers.
SKU: PMCD210412
Manufacturer part number: P7891-A
Manufacturer: EFI
Rockhopper 3 Steel Belt 64 – DF-42874
$218.67This generic steel belt of 64 inches is suitable for Mutoh Rockhopper 3 65 and Spitfire 65 printers. This is a high quality generic belt that corresponds to Mutoh part number DF-42874). This belt is 4750mm long and 25mm wide.
SKU: PBEMURH001O
Manufacturer part number: DF-42874
Manufacturers: DIGIPRINT , Mutoh
VJ-1204 L Type Fitting Waste (20 pcs) – DG-41175
$253.43The Mutoh VJ-1204 printers are compatible with this L-Type Fitting Waste.
SKU: GZ-06285-40
Manufacturer part number: GZ-06285-40
Manufacturer: Mutoh
S60 Carriage Belt – 990.0346.04
$75.89The Secabo S120 cutting plotters can use this carriage belt. This is the original Secabo part (number 990.0346.02). This carriage belt has a width of 9 mm and a length of 2813 mm.
SKU: 990.0346.04
Manufacturer part number: 990.0346.04
Manufacturer: Secabo
Related Products
Marabu ClearShield® Anti-Graffiti Part A, Gloss – 1 Quart
$142.91Marabu Clearshield® Anti-Graffiti is a two-part, water-based liquid clear coat that protects any print from UV rays, resists chemicals and abrasion, and has unparalleled anti-graffiti properties. It is made to protect non-water-sensitive media like vinyl and banners printed with UV, solvent, and Latex inks from graffiti made with spray paint, latex paint, markers, and other materials.
SKU: 360264581
Manufacturer part number: 360264581
Manufacturer: Marabu
DIGIMEDIA Monomeric Gloss Overlaminate – 1050 mm x 50 m (42″ x 164′)
$164.50High-quality, self-adhesive monomeric 70μ clear vinyl, with UV protection and a permanent, high tack acrylic-based, adhesive. This competitive calendered vinyl, which comes in gloss and matte finishes, is an excellent lamination for protecting digitally printed images. Easy to clean, this film can also be used as anti-graffiti protection. Price per sqm: as low as €1.30 / sqm
SKU: DLMG42
Manufacturer part number: DLMG42
Manufacturer: DIGIPRINT
DIGIMEDIA Monomeric Gloss Overlaminate – 1372 mm x 50 m (54″ x 164′)
$228.14
DIGIMEDIA Polymeric Matte Overlaminate – 1372 mm x 50 m (54″ x 164′)
$344.88
Marabu ClearJet Original Type A2000, Gloss – 12 oz Spray Can
$45.15Protecting your prints, fine art, signs, banners, photographic output, awnings, and other products from UV rays, abrasion, and marring is simple and affordable with Marabu ClearJet®.
SKU: 360363001
Manufacturer part number: 360363001
Manufacturer: Marabu
Marabu ClearShield® Anti-Graffiti Part B, Gloss – 16 oz
$109.47Marabu Clearshield® Anti-Graffiti is a two-part water-based liquid clear-coat that offers UV-protection, chemical resistance, abrasion resistance and unmatched anti-graffiti properties to any print. It is made to protect non-water-sensitive media like vinyl and banners printed with UV, solvent, and Latex inks from graffiti made with spray paint, latex paint, markers, and other materials.
SKU: 360256591
Manufacturer part number: 360256591
Manufacturer: Marabu
Reviews
There are no reviews yet.