Description
Marabu ClearShield Select is made with the most recent developments in water-based coating technology and offers superior resistance to abrasion, chemicals, and UV rays. ClearShield Select improves image quality while providing superior protection for digital prints. The new coatings work on a variety of digital substrates and offer enhanced outdoor protection as well as enhanced chemical and mar resistance. For both manual and automated applications, the ClearShield Select coatings are available in gloss, semi-gloss, and matte finishes. It is intended to be applied with a roller or spray equipment on a wide range of digitally printed products including pressure sensitive vinyl, banners and rigid substrates.
Benefits:
ClearShield® liquid coatings offer the same protection as film laminates while saving as much as 60% in production costs. Liquid coating is easy to use and does not require expensive equipments. In contrast to lamination films, there is no risk of bubbling or misalignment with liquid coating.
Specifications:
Product type : Water based liquid coating
Viscosity : Shell Cup #3 30-35 sec
VOC : 48g/L
PH : 8.5 -9.0
Application : Short-Nap roller or High Density Foam Roller
Ink compatibility : Solvent and UV inks.
Media compatibilty : adhesive vinyl, banners, rigid substrates
Coverage of 1L : around 14-15m2 with Roller
Applications:
Banners
Billboards
Exterior Signage
Vinyl
Rigid Substrates
Application Method:
Manual application : Roll the clearshield coating onto the prints using a short-nap roller or a white high-density foam roller. Apply two layers, waiting approximately an hour in-between to complete drying.
Products Finishes available:
Gloss
Semi-Gloss
Matte
JFX200-2513 Y-Drive Belt – M801920
$1,296.74Mimaki printers can use this JFX200-2513 Y-Drive Belt – M801920.
SKU: M801920
Manufacturer part number: M801920
Manufacturer: Mimaki
BN-20 Carton, Stopper Carriage – 1000008699
$20.27This product has been discontinued by the manufacturer. Please scroll down for more information below.
SKU: 1000008699
Manufacturer part number: 1000008699
Manufacturer: Roland
CG-160FX Toothed Belt 160 – M800709
$63.93This generic toothed belt 160 is suitable for Mimaki CG-160FX cutting plotters.
SKU: PBEMI11471O
Manufacturer part number: M800709
Manufacturers: DIGIPRINT , Mimaki
TS300P-1800 Cap Assy – M015950
$161.12Mimaki printers can use this TS300P-1800 Cap Assy.
SKU: M015950
Manufacturer part number: M015950
Manufacturer: Mimaki
SJ-740 L-Bearing SSR15XW1UUE – 21895153 (Block only)
$306.56For some Roland printers, this generic bearing block, SSR15XW1UUE, is suitable.
SKU: PMERO17713
Manufacturer part number: 21895154
Manufacturers: Roland , DIGIPRINT
Y Tube Fitting ID Tubing 6.4MM Nylon White (100 pcs)
$307.17This nylon Y tube fitting is compatible with all wide format inkjet printers and resists solvents.
SKU: Y260-1
Manufacturer: DIGIPRINT
Related Products
DIGIMEDIA Polymeric Matte Overlaminate – 1524 mm x 50 m (60″ x 164′)
$380.11
DIGIMEDIA Polymeric Matte Overlaminate – 1372 mm x 50 m (54″ x 164′) – PALLET
$379.38
DIGIMEDIA Monomeric Matte Overlaminate – 1372 mm x 50 m (54″ x 164′)
$227.50
DIGIMEDIA Monomeric Gloss Overlaminate – 1600 mm x 50 m (63″ x 164′)
$277.82High-quality, self-adhesive 70 clear monomeric vinyl with UV protection and an acrylic-based, high-tack, permanent adhesive. This competitive calendered vinyl, which comes in gloss and matte finishes, is an excellent lamination for protecting digitally printed images. Easy to clean, this film can also be used as anti-graffiti protection. As low as €1.05 per square meter
SKU: DLMG63
Manufacturer part number: DLMG63
Distributor: DIGIPRINT
DIGIMEDIA Monomeric Matte Overlaminate – 1060 mm x 50 m (42″ x 164′)
$164.50
Reviews
There are no reviews yet.